741228

Hendi 239209 Manual

7
Zoom out
Zoom in
Previous page
1/64
Next page
7
EN
- Temperature control: you can set the tem-
perature between 60°C and 240°C in 20°C in-
crements. Default setting for the appliance is
200°C. ATTENTION! The set temperature is that
of the glass plate and not the temperature in
the pan!
• If you select power level, select “Power” using
the “Function” key. Now you can set the power
required by means of the arrow keys,
• If you select temperature control, select “Temp”
using the “Function” key. Now you can set the re-
quired temperature by means of the arrow keys
between 60°C and 240°C in 20°C increments.
• After setting the power level or temperature, you
can optionally to set the timer. This timer switch-
es the appliance off after the programmed time
has been reached. You do this by pressing the
“Function” key once more after setting the power
level or temperature, and selecting “Timer”. Now
you can set the required time in 5 minute incre-
ments. The maximum time is 180 minutes.
• The display will go off and the lights next to “ ”,
“ ” and “ ” will go off. The light next to the
“ON/OFF” will stay lit.
• If you do not use the appliance for an extended
period, remove the plug from the wall-mounted
electrical socket and remove the pans from the
appliance.
• ATTENTION! Allow the appliance to cool off be-
fore you touch it. The glass plate is very hot after
use.
Cleaning and maintenance
• Always remove the plug from the socket before
cleaning the appliance and wait until the unit is
cooled down completely.
• Beware: Never immerse the appliance in water
or any other liquid!
• Clean the outside of the appliance with a damp
cloth (water with mild detergent).
• Never use aggressive cleaning agents or abra-
sives. Do not use any sharp or pointed objects.
Do not use petrol or solvents! Clean with a damp
cloth and detergent if necessary.
• Clean the ventilation slots (if applicable) with the
vacuum cleaner.
• Clean the glass cooking top every time after you
use it to prevent any residues from burning onto
the glass cooking top.
Failure codes
Code Failure Possible cause Possible solution
E01 Overheating of the electro-
nics
Insufficient ventilation Check ventilation slots on
dust and make sure there
is enough space around the
appliance.
Switch the appliance off, let it
cool off and switch it on again
E02 The pan on the glass plate is
overheating
Empty or overheated pan or
pan with too hot oil
Remove the plug from the
wall-mounted electrical
socket, let it cool off and plug
it back in
E03 Mains voltage too high or
too low.
Fault in the mains Electrical installation is not
in order, have an electrician
check it
In all other cases please contact your supplier. In case of any doubt, always contact your supplier!
• Use only pans that are suitable for induction and
have not been used before on other sources of
heat.
• Pans with a sandwich bottom that have been
used on gas, can warp and are not suitable any-
more for electric, ceramic, halogen or induction
cooking.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 239209 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 239209 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info