Manual Hendi 239209 (page 6 of 64) (English, German, Dutch, French, Italian, Polish)

741228

Zoom out

Zoom in

1/64

The control panel

1. “Function” key: Use this key to select the re-

quired function. The function selected is shown

by the lights numbered 4. You can select setting

the power level ( ), the temperature ( ) and the

time ( ).

2. “ON/OFF” key: Use this key to switch the appli-

ance on or to interrupt or reset the timer. When

you switch the appliance on, the most recently

selected function will light up and the display will

go on. The red light next to the “ON/OF” key will

go on as soon as the appliance is at mains volt-

age and thus will not go off when you press the

“ON/OFF” key.

3. “Arrow” keys: Use these keys for programming

the power level, temperature or timer. The up

arrow increases the setting value and the down

arrow reduces the setting value.

4. These lights indicate what mode you have select-

ed by means of the “Function” key.

5. You can read the set value on this display. These

are steps 1 through 10 for power level control,

from 60°C to 240°C for temperature control and

from 0 to 180 minutes for timer settings.

Power level 1 2 3 4 5 6 7 8 9 10

Setting power 500W 1000W 1100W 1200W 1300W 1400W 1500W 1600W 1700W 1800W

Operation

• Insert the plug in the wall socket; the red light

next to the “ON/OFF” key will now go on.

• Set the pan of your choice on the cooking sur-

face, bearing the above mentioned instructions

in mind.

• ATTENTION! Make sure that the pans are cov-

ering the indicated zones at all times during use

in order to prevent the appliance from getting

damaged.

• ATTENTION! Do not leave your pan on the appli-

ance while empty as this may lead to damage to

your pans.

• Switch the appliance on by pressing the “ON/

OFF” key. If your pan is suitable for induction and

has a bottom diameter of 12 cm, at minimum, the

appliance will go into operation. You will recog-

nize this from the fact that the fan will go on and

the display will show a power level of “5”.

• ATTENTION! If the appliance beeps after being

switched on, the pan you are using is not suitable

for induction or the appliance is defective. In case

of any doubt, always contact the supplier of your

pan!

• Once the appliance is operating and the display

indicates power level “5”, you can program the

appliance in one of the following two ways:

- Power level: You can control the performance of

the appliance, just as for a gas stove, via power

level 1 through 10. Set the appliance to the de-

fault level “5”.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 239209 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 239209 Manual

Product: