741203
31
Zoom out
Zoom in
Previous page
1/40
Next page
CONTROL DE LA PRESIÓN
La presión de red debe respetar las siguientes indicaciones.
GPL
ADMITIDO Entre 20/25 y 35/45 mbar
NO ADMITIDO inf. a 20/25 sup. a 35/40 mbar
NATURAL - H
ADMITIDO Entre 17 y 25 mbar
NO ADMITIDO inf. a 17 e sup. di 25 mbar
1. Cuando la presión de la red en el lugar de la instalación no sea conforme a lo indicado anteriormente, avise a la sociedad
suministradora y no ponga en funcionamiento el aparato hasta que el problema haya sido solucionado y eliminado.
2. Controle la presión en la red con un manómetro en U (definición mín. 0.1mbar), conectable a la toma de presión detrás del
cuadro de mandos.
3. Retire el cuadro de mandos.
4. Saque el tornillo y la arandela de la toma de presión y conecte el manómetro.
5. Ponga en funcionamiento el equipo de acuerdo con las instrucciones adjuntas y controle si la presión indicada está en el
campo de las presiones admitidas.
6. Desconecte el manómetro y vuelva a incorporar el tornillo y la arandela a la toma de presión.
7. Incorpore el cuadro de mandos.
CONEXIÓN A LA RED ELÉCTRICA
Antes de proceder con la conexión a la red eléctrica, compruebe los datos técnicos indicados en la placa de
características. El aparato se suministra con cable de alimentación (3x1,5 H07RN-F).
El instalador debe hacerse cargo de la conexión, tras haber intercalado un enchufe estándar conectado a un enchufe de fácil
acceso, o en el caso de una conexión fija, con la interposición de un interruptor principal, que además de ser de fácil acceso,
debe cortar la erogación de energía de modo omnipolar y los contactos de abertura deben tener entre una distancia mínina
de al menos 3mm para cada polo. Es indispensable conectar el aparato a una toma de tierra que funcione correctamente. El
cable de alimentación no debe estar situado cerca de manantiales de calor y el ambiente alrededor no debe superar la
temperatura de 50°C. El equipo debe estar incluido en un sistema equipotencial. La conexión se efectúa mediante un tornillo
contramarcado con el símbolo colocado debajo del aparato, cerca de la pata anterior derecha. El cable equipotencial debe
tener una sección de 10mm
2
.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 226094 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 226094 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info