741834
5
Zoom out
Zoom in
Previous page
1/112
Next page
5
EN
be damaged. Failure to observe this prohibition invalidates any responsibility of
the manufacturer of the machine.
• The appliance is intended for professional use and must be utilised by qualifi ed
personnel trained to use it.
• Any modifi cation which may be necessary on the electrical system to enable in-
stallation of the appliance, must be carried out solely by competent personnel.
It is dangerous to modify or attempt to modify the characteristics of this appliance.
Never clean the appliance with direct water jets, because, if any water enters, it
could limit the machine’s safety.
• Before doing any maintenance or cleaning jobs, disconnect the appliance from
the electrical mains and allow it to cool.
Do not attempt to carry out the periodic controls or any repairs by yourself. Con-
tact the nearest Service Centre and use only original spare parts.
When the tilting door is wide open, do not put anything on the surface, because
the door hinges could be irreparably damaged.
N.B.: Improper or incorrect use and failure to observe the installation instruc-
tions shall release the manufacture from all responsibility. In this connection,
the directives in the “POSITIONING” paragraph must be strictly observed.
3. TECHNICAL SPECIFICATIONS
Model 225165
Dimensions of appliance 590x695x(H)590 mm
Weight of appliance 36,4 kg
Max absorted power 2,6 kW
Convection heating element 2,5 kW
Grill heating element 1,9 kW
Top and bottom heater 2,3 kW
Power supply voltage 230 V / 50 Hz
Appliance class I
Power cable diameter 3x1,5 mm²
Type of cable H07RN-F
Electric cable connection Type Y
The noise level of the appliance in operation is below 70 dB (A).
The “technical data” plate is positioned on the rear panel of the appliance.
The manufacturer and dealer is not liable for any
inaccuracies due to printing errors or transcrip-
tion, in this manual. In line with our policy of con-
tinuous improvement products, we reserve the
right to make modification of the product, pack-
aging and specifications contained in the Docu-
mentation without prior notice.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 225165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 225165 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 8,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info