Manual Hayward TigerShark QC (page 22 of 151) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish, Norwegian)

801914

Zoom out

Zoom in

1/151

Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.

Use of non genuine Hayward manufactured parts will void all warranty.

Page 7 of 14 TigerShark / TigerShark QC / TigerShark 2 Rev. C

The motor unit (13) and the power supply box (1) do not contain any parts that are of use to the user. If they are opened the

warranty automatically becomes NULL AND VOID.

TigerShark Quick Clean

1. For installation and normal use of TigerShark QC, please refer to the chapter on general use.

2. In order to select the normal cycle or the economy cycle, please follow the following instructions: on switching on, the

economy programme is automatically selected. The “Quick Clean” light, situated on the control box, then comes on. In

this mode, TigerShark will switch off automatically after 90 minutes.

3. In order to select the normal programme, please press the “Full Cycle” button. The light situated above the button comes

on and indicates that the normal programme is running. In this mode, TigerShark will switch off automatically after 4 hours.

If the economy mode is nished, you should switch off TigerShark and then switch it back on in order to select normal mode:

normal mode can be selected only during an economy cycle.

Warning : Robotic cleaner equipped with Foam :

First run : Remove plastic sleeve protecting the foams before using the cleaner.

Do not use sharp tools to remove this plastic sleeve in order to avoid foams deterioration.

Put the cleaner in the water to soak the foams as they must be wet, press the foams with both hands under water to speed

the process.

Repeat the above process before each use.

Maintenance :

1- Clean the cartridge of the lter after use, every time the cleaner is used:

Lay TigerShark on its side. Undo the fastenings of the bottom cover (6) (Figures 1c-1d) and remove the bottom cover

assembly (7) (Figure 1e)

Remove the lter cartridge. If your lter is in 3 parts (ref. RCX70100), remove each element and clean it thoroughly using a

hosepipe with a spray head so to remove all of the waste. Hold the elements as shown in Figure 1f to enable the waste to

fall off.

Wash the inside of the bottom cover.

Put the lter cartridge back (Figure 1g)

Fit the bottom cover and re-engage the fastenings.

2- Clean the moving parts frequently.

CAUTION: unplug the power supply box before performing this cleaning operation.

Inspect the orice of the pump to check that no waste or hair is obstructing the Venturi tube. It can be cleaned by removing the

tube (9) and by turning it (Figure 1h). Clean off all of the waste that has built up between the tracks (10) and the wheels (11).

Regularly inspect the cleaner and cable; do not use if damaged or if any rough edges are visible on the cleaner; this can

cause damage to the pool.

Storage:

When it is out of the water, lay TigerShark on its side in a dry and shady place at a temperature between 5°C and 46°C

(Figure 1i)

Maintenance for the cable:

After a while and with use, the cable can become twisted (like a telephone cord). To remedy this, wedge

the handle in the opposite diagonal position (Figure 1b). TigerShark will then turn in the pool in the opposite

direction and the cable will untwist itself. It is also possible to pull regularly on the cord in the sun in order

to solve the problem.

Above all, remember to reverse the position of the handle after use, every time the cleaner is used.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hayward TigerShark QC in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 6.13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hayward TigerShark QC Manual

Product: