801914

Hayward TigerShark QC Manual

23
Zoom out
Zoom in
Previous page
1/151
Next page
Hayward only guarantees the quality, performance and safety of its products when assembled with genuine Hayward manufactured parts.
Use of non genuine Hayward manufactured parts will void all warranty.
Page 8 of 14 TigerShark / TigerShark QC / TigerShark 2 Rev. C
IMPORTANT: check the cable regularly to make sure that it has no external damage.
If the supply cord is damaged, it must be replace by the manufacturer, its service agent or similarly qualied persons in order
to avoid a hazard.
SOLUTIONS TO FREQUENTLY ASKED QUESTIONS:
TIGERSHARK WILL NOT CLIMB THE WALLS
Clean the lter. It might be clogged or too heavy due to waste or to too much algaecide being present.
The brushes might be worn. Examine them and change them if necessary.
Check the electrical installation and make sure that the voltage is correct: 230 V
50/60Hz
The water temperature should be greater than 15°C, otherwise the PVC brushes might stiffen and affect TigerShark’s capacity
to climb the walls.
Replace the PVC brushes with foam brushes. Ensure that the handle is in the diagonal position.
TIGERSHARK HAS LOST SUCTION
Clean the lter. It might be clogged and be preventing suction.
Check that the feeds in the bottom cover are not blocked, and clean them if necessary. Check the Venturi tube for any waste
or damage. Clean or replace if necessary.
An intake that clips onto the bottom cover is available from your dealer. This makes it possible to achieve a higher speed and
thus improved suction of small or heavy waste.
TIGERSHARK STOPS SUDDENLY WHILE IT IS CLEANING
The Venturi tube might be clogged with waste. Check and clean if necessary, by following the instructions in the chapter on
maintenance.
The bearings of the brushes or the tracks are stuck. Check whether there is any dirt; clean them if necessary.
Put the TigerShark back in the water and switch it back on. In order to protect the fragile components, TigerShark will cut out
automatically if it is removed from the water.
TIGERSHARK IS NOT WORKING ANY MORE
Check the socket for the voltage surge switch system to ensure that the power supply is correct.
Check the power of the power supply box per section (see below).
Check the oating cable per section
CHECKING THE POWER SUPPLY BOX
The power supply box is protected by an automatic circuit that interrupts the current. To switch it back on, move to the “OFF”
position and then to the “ON” position.
The power supply box is equipped with an internal circuit. The voltage across terminals 1 and 2 of the power supply socket
for the cleaner must be 24 V ⎓.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward TigerShark QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward TigerShark QC in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 6.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info