801892
26
Zoom out
Zoom in
Previous page
1/100
Next page
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Page 9 of 16 AquaRite® Pro LS Rev. D
Settings Menu
The Settings Menu is used to configure the AquaRite Pro LS and adjust various settings. Access this menu by pushing
the Settings Menu button. Refer to the information below when setting system operating parameters.
To access the Settings Menu
Setting
Menu - Locked Press BOTH buttons SIMULTANEOUSLY for 5 seconds to unlock
Setting
Menu - Unlocked Move to settings menus
NOTE: To prevent unauthorized access, the settings menu automatically “locks” after 2 minutes of no
buttons being pressed.
Rotates between available languages
Move to previous/next settings menu
Language
English
Language
The AquaRite Pro LS can display the following languages: English (default), French, Spanish, Italian,
German, Portuguese and Dutch. Select the desired language.
Toggle between Pool and Spa
Move to next menu item
Body of Water Type
Pools
Toggle between Salt (default) and Minerals
Move to next menu item
Display
Salt
Toggle between available cell types
Move to previous/next menu item
Cell Type
T-CELL-15
Push to access Chlorinator option
Move to previous/next menu item
Chlor. Config.
+ to view/change
Body of Water Type
Select Pool or Spa. "Pool" should be selected for bodies of water over 4 M³. The AquaRite Pro LS will
adjust its operation according to this selection.
Display
Allows for the display of salt (default) or mineral values.
Cell Type Selection
Ref. AquaRite Pro LS T-Cell provided Cell Type Selection in the menu
AQR-PRO-75LSE T-CELL-LS15-E T-CELL-15
AQR-PRO-50LSE T-CELL-LS9-E T-CELL-9
Note that the unit will not function properly if the wrong cell is selected.
Sensing System
Enabled
Toggle between Enabled and Disabled (default)
Move to next menu item
If AQL-CHEM is used
Chemistry Config.
Wizard + to enter
Push to access Chemistry Cong. Wizard
Move to previous/next menu item
Requires use of the AQL-CHEM Sensing Kit. Following the steps of the Chemistry Config. Wizard will
set up the AQL-CHEM to sense ORP and pH levels. The AquaRite Pro LS will generate the correct
amount of chlorine to properly sanitize the pool based on the AQL-CHEM sensing function. Refer to the
AQL-CHEM manual for more detailed information.
If ORP Auto Sensing is not used
Chlorinator
50%
Adjust the desired output % for the pool
Move to previous/next menu item
The desired output % is used to control the amount of chlorine the AquaRite Pro LS generates. Raise
this setting to increase chlorine level and lower it to decrease chlorine level. If an AQL-CHEM is being
used and ORP Auto Sensing is enabled (see AQL-CHEM manual), the AquaRite Pro LS will override the
desired chlorinator output % setting and generate chlorine based on the pool's ORP level.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward Aqua Rite Pro LS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward Aqua Rite Pro LS in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info