801892

Hayward Aqua Rite Pro LS Manual

23
Zoom out
Zoom in
Previous page
1/100
Next page
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Page 6 of 16 AquaRite® Pro LS Rev. D
WEIGHT OF SALT (kg) NEEDED FOR 1.5 g/l
Current salt
level g/l
M³ of Pool water
20 25 30 35 40 45 50 55 60 65 70 75 80 85 90
030 37.5 45 52.5 60 67.5 75 82.5 90 97.5 105 112.5 120 127.5 135
0.2 26 32.5 39 45.5 52 58.5 65 71.5 78 84.5 91 97.5 104 110.5 117
0.4 22 27.5 33 38.5 44 49.5 55 60.5 66 71.5 77 82.5 88 93.5 99
0.6 18 22.5 27 31.5 36 40.5 45 49.5 54 58.5 63 67.5 72 76.5 81
0.8 14 17.5 21 24.5 28 31.5 35 38.5 42 45.5 49 52.5 56 59.5 63
110 12.5 15 17.5 20 22.5 25 27.5 30 32.5 35 37.5 40 42.5 45
1.2 6 7.5 9 10.5 12 13.5 15 16.5 18 19.5 21 22.5 24 25.5 27
1.4 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9
1,5 Ideale Ideale Ideale Ideale Ideale Ideale Ideale Ideale Ideale Ideale Ideale Ideale Ideale Ideale Ideale
1.6 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
1.8 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
2.5 & + Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute
WEIGHT OF STABILIZER (CYANURIC ACID in kg) NEEDED FOR 25 PPM
Current Stabilizer
level in ppm
M³ of Pool water
20 25 30 35 40 45 50 55 60 65 70 75 80 85 90
0 ppm 0.50 0.63 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13 2.25
10 ppm 0.30 0.38 0.45 0.53 0.60 0.68 0.75 0.83 0.90 0.98 1.05 1.13 1.20 1.28 1.35
20 ppm 0.10 0.13 0.15 0.18 0.20 0.23 0.25 0.28 0.30 0.33 0.35 0.38 0.40 0.43 0.45
25 ppm 000000000000000
CONTROLS
Keypad Buttons
RUN/STOP: The AquaRite Pro LS will toggle back and forth between RUN and STOP with each push of the
RUN/STOP button.
RUN: When in RUN mode, the AquaRite Pro LS will produce chlorine according to the desired output % or ORP
setting (when AQL-CHEM is used) for the entire filtering/pumping cycle. The AquaRite Pro LS can only produce
chlorine when RUN is selected and the filter pump is running.
STOP: When in STOP mode, the AquaRite Pro LS is prevented from energizing the electrolytic cell. In this
position there is no chlorine generation. NOTE: To service any of the pool equipment or the AquaRite Pro LS, the
power must be turned off at the circuit breaker.
SUPER CHLORINATE: (if AQL-CHEM sensing is NOT used) When you have an abnormally high bather load, a
large amount of rain, a cloudy water condition, or any other condition which needs a large amount of purification
to be introduced, SUPER CHLORINATE should be selected. This electronically “super chlorinates” (shocks) the
water for a user selectable period of 1-96 hours (filter pump must be on during this time) or until the power has
been turned off, whichever comes first. The AquaRite Pro LS will automatically revert back to the previous desired
output % setting at the end of the super chlorinate period.
INFO: Push the INFO button to enter the Information Menu.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward Aqua Rite Pro LS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward Aqua Rite Pro LS in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info