The Rx value gives information about the oxidation/reduction potential and is used to determine the water sterilization capacity. The setpoint is the
minimum Rx value for activation/deactivation of the titanium cell. Adjusting the ideal Rx level (setpoint) is the last step in the system set-up. Follow these
steps to determine the ideal Rx levels for your pool:
1. Connect your pool ltration system (the salt in the pool must be completely dissolved).
2. Add chlorine to the water until a level of 1-1.5 ppm is reached (approx. 1-1.5 g/m3 water). pH levels should be between 7.2 – 7.5.
3. After 30 minutes take a reading of the free chlorine level in the pool (manual test kit DPD1). If the free chlorine level is in the range 0.8 – 1.0 ppm,
look at the value on the Rx display and put this value into the memory as the setpoint to activate/deactivate the electrolysis/hydrolysis cell.
4. The next day check the levels of free chlorine (manual test kit DPD1) and Rx. Raise/lower setpoint if necessary.
5. Remember to check the Rx setpoint every 2-3 months and/or when the water parameters change (pH/temperature/conductivity).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Hayward Aqua Rite Flo Advanced at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Hayward Aqua Rite Flo Advanced in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.
The manual is 94.1 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.