502640
15
Zoom out
Zoom in
Previous page
1/19
Next page
RECALLING
THE PRESET STATIONS
Select the preset number of the
desired preset station with the UP or
DOWN TUNE/PRESET (in the
PRESET mode) or NUMERIC buttons
on the remote control unit.
SCANNING THE PRESET
STATIONS IN SEQUENCE
1. Press the PRESET SCAN button
on the remote control unit to listen
to a brief sample of each preset
station.
2. The receiver will start scanning the
stations in the preset sequence
and each station is received for 4
seconds.
3. At the desired station, press again
to stop scanning.
NOTES:
If the end of the frequency range is
reached during the auto or manual
tuning, tuning will continue from
the opposite end.
When FM stereo broadcasts are
poor, select the FM mono mode
with the SEEK STEREO button so
that the AUTO indicator goes off.
When storing a new station preset,
the previously memorized station
on the same preset is cleared.
In the event of a power failure or
when the receiver is disconnected
from the AC outlet, the memorized
stations are maintained for
approximately 2 weeks.
RECORDING
WITH A CASSETTE DECK
1. Select the program source to be
recorded with the INPUT
FUNCTION SELECTOR buttons.
2. Start recording on the cassette
deck.
3. Play back the desired program
source and start recording on the
cassette deck.
• The volume, balance, bass and
treble settings have no effect on
the recording.
• When recording is performed on
a 3-head cassette deck, the
recorded sound can be
monitored through the speakers
by pressing the TAPE MONITOR
button to ON.
DUBBING FROM
VCR2 TO VCR1
1. Press the VCR2 INPUT FUNCTION
SELECTOR button and play back
on the VCR connected to VCR2.
The video and audio signals from
VCR2 will be dubbed auto VCR1.
2. Start recording on the VCR
connected to VCR1.
RECORDING WITH SEPARATE
VIDEO AND AUDIO SOURCES
When dubbing from VCR2 to VCR1,
you can replace the audio signal from
VCR2 with the audio signal from other
program sources.
1. Press the VCR2 as a video source
to be recorded.
2. Select the audio source (CD,
TV/AUX, FM/AM) to be recorded
with the INPUT FUNCTION
SELECTOR buttons.
3. Start recording on the VCR
connected to VCR1.
4. This allows you to watch the
picture from the video component
on the television and listen to the
sound from the audio component
through the speakers while
recording.
NOTE: Be sure to observe the order
of steps 1 and 2.
13
ENGLISH
AVR10 engelsk 11/01/98 10:10 Side 13
15


Need help? Post your question in this forum.

Forumrules
1

Forum

harman-kardon-avr10

Reset search

  • volume control stuck at one output but will still turn Submitted on 28-1-2024 at 13:39

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR10 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info