Manual Harman Kardon AVR10 (page 14 of 19) (English)

502640

Zoom out

Zoom in

1/19

Operation

ENGLISH

BASIC OPERATION

1. Press the POWER button to ON.

The display panel will light up.

Note: If you prefer to turn the unit

off and on with the remote control,

this button must be left in the ON

position. The remotes Standby

button will then turn the unit ”ON”

and ”OFF” by taking it in and out of

standby mode.

2. Select the desired program source

with the INPUT FUNCTION

SELECTOR buttons. The selected

input function will appear in the

display.

3. Operate the selected component

for playback.

• When a video source is selected,

the picture will appear on the

television and sound will be

heard from the speakers.

• When playing back a video

source with surround sound

effects, refer to the “Surround

Sound Effects” of this manual.

• When the TAPE MONITOR button

is set to ON so that the TAPE

MONITOR indicator lights up,

selected program sources other

than TAPE cannot be heard from

the speakers.

To listen to a program source

other than cassette deck be sure

to set the TAPE MONITOR button

to OFF.

4. Adjust the volume to a comfortable

listening level with the VOLUME

control or MASTER VOLUME

UP/DOWN buttons on the remote

control.

5. For private listening, insert a 6,3

mm plug of the headphone into the

HEADPHONE jack.

• When the headphones are

plugged in, sound from the

speakers is cut off.

LISTENING TO BROADCASTS

Press the AM or FM button and use

auto, manual or preset tuning to

select a radio station.

AUTO TUNING

If broadcast signals are strong

enough, auto tuning is possible.

1. Press the FM or AM button to

select the desired band.

2. Press the Seek Stereo button so

that AUTO lights up in the display.

3. Press the UP or DOWN

TUNE/PRESET button. Tuning will

start automatically and stop at a

broadcast station frequency with

sufficient signal strength.

MANUAL TUNING

Auto tuning may not be possible if the

broadcast signal is weak. If so, use

manual tuning.

1. Press the FM or AM button to

select the desired band.

2. Press SEEK STEREO to delete the

AUTO in the display.

3. Press the UP or DOWN

TUNE/PRESET button until the

desired station frequency is

reached.

• Each time the button is pressed,

the frequency changes by a step.

• When the button is kept pressed,

the frequency changes

continuously in sequence.

PRESET TUNING

The receiver has a memory for up to

30 preset stations.

If the station frequencies are stored in

this memory, they can be tuned in by

a simplified procedure:

MANUAL PRESETTING

Up to 30 stations can be preset at

random, regardless of the reception

band.

1. Tune in the station to be stored in

memory using the auto or manual

tuning.

2. Press the MEMORY button. The

MEMORY indicator will light up for

5 seconds.

3. Select the preset number with the

UP or DOWN TUNE/PRESET

button or the numeric buttons on

the remote while the MEMORY

indicator is lit.

4. Press the MEMORY button to store

the station.

• When using the NUMERIC

buttons on the remote, the

station is stored in memory

without pressing the MEMORY

button again.

• When selecting single digit preset

numbers with the NUMERIC

buttons on the remote, press the

corresponding number without

pressing ”0” first.

5. Repeat steps 1 to 4 to preset other

stations.

AVR10 engelsk 11/01/98 10:10 Side 12

volume control stuck at one output but will still turn Submitted on 28-1-2024 at 13:39
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR10 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR10 Manual

Product: