502640
16
Zoom out
Zoom in
Previous page
1/19
Next page
14
AVR10 System Remote Control
1. INFRARED
TRANSMITTER WINDOW
The infrared beam is emitted forward
from this window when you press any
button on the commander. For the
remote controls to function properly,
always face this window toward the
remote sensor window on the
receiver and do not obstruct this
window with any material.
2. STANDBY BUTTON
Press this button to turn the power on
and off.
NOTE: For the Standby Button to
work, the power switch on the AVR
10 must be set to ON.
Automatic power on: When you press
the input function buttons (CD,
TUNER, TAPE, TV/AUX, VCR1,
VCR2) in STANDBY mode, the power
is automatically turned on and the
function is selected.
3. TUNING UP/DOWN
Press these buttons to tune the
receiver up or down.
4. PRESET SCAN BUTTON
Button for scanning preset station
frequencies (see page 13).
5. NUMERIC BUTTONS
These buttons can be used for preset
tuning in TUNER mode.
Preset tuning: Select one of 30 preset
locations by pressing the numeric
buttons directly, thereby the input of
the receiver automatically is changed
to TUNER.
6. CD FUNCTION BUTTONS
For a CD PLAYER: DISC (DISC
SELECTOR is available for the
Harman Kardon FL8400, FL8450CD
changer), PLAY, PAUSE, STOP,
BACKWARD SEARCH, FORWARD
SEARCH, A-B and INTRO buttons are
available.
When selecting a disc, press the
DISC button.
7. CASSETTE DECK
FUNCTION BUTTONS
For a cassette deck:
PAUSE/RECORD, STOP, REVERSE
PLAY, FORWARD PLAY, REWIND,
FAST FORWARD buttons are
available.
8. DELAY TIME BUTTON
This button operates only in Dolby
Pro Logic mode. In this mode the
output signal from the surround
speakers is delayed slightly from that
of the front speakers.
Select appropriate delay time to
achieve the best surround sound
effect. For Dolby Surround sound, we
recommend a 20ms delay. The delay
time is changed as below, when the
button is pressed in succession.
DOLBY PRO LOGIC MODE
9. INPUT
FUNCTION SELECTOR
Press the button to select the desired
input function. The available buttons
are CD, TUNER, TAPE MON, TV/AUX,
VCR1, and VCR2.
10. CENTER LEVEL
UP/DOWN BUTTONS
Use these buttons to adjust the
sound level of the center speaker to
that of the front speakers. These
buttons work only in Dolby Pro Logic
and Dolby 3 Stereo mode. These
buttons do not work in PHANTOM
mode.
11. CENTER MODE BUTTON
Selects the center mode (see page 11).
12. TEST TONE BUTTON
Generates test sounds in all channels
(Left, Center, Right and Surround) in
succession.
13. REAR LEVEL
UP/DOWN BUTTONS
These buttons operate only in Dolby
PRO LOGIC mode. Use these buttons
to adjust the sound level of the
surround speakers. Set the MASTER
VOLUME control at the desired level
and press the REAR LEVEL up or
down button until you get the
optimum surround effect at your
listening position.
14. MASTER VOLUME
BUTTONS
Adjust the overall (Front, Center, and
Rear) volume level.
15. DISPLAY BUTTON
Press once and the display dims,
press again and it turns off. Press a
third time and it goes on.
16. SLEEP BUTTON
Set the receiver to automatically turn
off after 10, 20, 30, 60, or 90 minutes.
Each time the button is pressed, the
setting is advanced as below.
The display will dim when the sleep
function has been set.
ENGLISH
15 ms 20 ms 25 ms 30 ms
15 ms 20 ms 25 ms 30 ms
AVR10 engelsk 11/01/98 10:10 Side 14
16


Need help? Post your question in this forum.

Forumrules
1

Forum

harman-kardon-avr10

Reset search

  • volume control stuck at one output but will still turn Submitted on 28-1-2024 at 13:39

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR10 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info