Manual Harman Kardon AVR 4000 (page 27 of 58) (English)

8518

Zoom out

Zoom in

1/58

OPERATION 27

Operation

Basic Operation

Once you have completed the setup and configu-

ration of the AVR 4000, it is simple to operate

and enjoy. The following instructions should be

followed for you to maximize your enjoyment of

your new receiver:

Turning the AVR 4000 On or Off

• When using the AVR 4000 for the first time, you

must press the Main Power Switch

on the

front panel to turn the unit on.This places the unit

in a Standby mode, as indicated by the amber

color of the Power Indicator

. Once the unit

is in Standby, you may begin a listening session by

pressing the System Power Control

or the

Source button

on the front panel or the AVR

Selector

∫

. Note that the Power

Indicator

will turn green.This will turn the

unit on and return it to the input source that was

last used.The unit may also be turned on from

Standby by pressing any of the Source Selector

buttons on the remote

4a6

∫ç∂

NOTE: After pressing one of the Input Selector

buttons

∂

(except VID4) to turn the unit on,

press the AVR Selector

∫

to have the

remote control the AVR functions.

To turn the unit off at the end of a listening ses-

sion, simply press the System Power Control

on the front panel or the Power Off

Button

on the remote. Power will be

shut off to any equipment plugged into the rear

panel Switched AC Outlets

and the

Power Indicator

will turn amber.

When the remote is used to turn the unit “off” it

is actually placing the system in a Standby mode,

as indicated by the amber color of the Power

Indicator

When you will be away from home for an

extended period of time it is always a good idea

to completely turn the unit off with the front

panel Main Power Switch

NOTE: All preset memories may be lost if the

unit is left turned off with the Main Power

Switch

for more than two weeks.

Using the Sleep Timer

• To program the AVR 4000 for automatic turn-

off, press the Sleep Button

on the remote.

Each press of the button will increase the time

before shut down in the following sequence:

The sleep time will be displayed in the Preset

Number/Sleep Timer Indicator

and it will

count down until the time has elapsed.

When the programmed sleep time has elapsed,

the unit will automatically turn off (to Standby

mode). Note that the front panel display will dim

to one half brightness when the Sleep function

is programmed.To cancel the Sleep function,

press and hold the Sleep Button

until the

information display returns to normal brightness

and the Sleep indicator numbers disappear and

the words SLEEP OFF appear in the

Main Information Display

Source Selection

• To select a source, press any of the Source

Selector buttons on the remote

ç∂

NOTE: After pressing one of the Input Selector

buttons

∂

(except VID4) to turn the unit on,

press the AVR Selector

∫

to have the

remote control the AVR functions.

• The input source may also be changed by

pressing the front-panel Input Source

Selector button

. Each press of the button

will move the input selection through the list of

available inputs.

• As the input is changed, the AVR 4000 will

automatically switch to the digital input (if

selected), surround mode and speaker configura-

tion that were entered during the configuration

process for that source.

• The front-panel Video 4 Inputs

may be

used to connect a device such as a video game

or camcorder to your home entertainment

system on a temporary basis.

• As the input source is changed, the new input

name will appear momentarily as an on-screen

display in the lower third of the video display.

The input name will also appear in the Main

Information Display

and a green LED will

light next to the selected input’s name in the

front-panel Input Indicators



• When a pure audio source (Tuner, CD, Tape, 6

Channel direct inputs) is selected, the last video

input used remains routed to the Video 1 and

Video 2 Outputs

(except from its own

Video 1/ source) and Video Monitor Output

. This permits simultaneous viewing and lis-

tening to different sources.

• When a Video source is selected, its audio sig-

nal will be fed to the speakers and the video sig-

nal for that input will be routed to the appropriate

Monitor Output jack

and will be viewable

on a TV monitor connected to the AVR 4000.

Controls and Use of Headphones

• Adjust the volume to a comfortable level using

the front panel Volume Control

or remote

Volume Up/Down

buttons.

• The Balance Control

may be used to

adjust the relative sound output between the left

front and right front speakers.

• To temporarily silence all speaker outputs

press the Mute button

. This will inter-

rupt the output to all speakers and the head-

phone jack, but it will not affect any recording or

dubbing that may be in progress. When the sys-

tem is muted, the MUTE indicator

will light

in the Main Information Display

. Press

the Mute button

again to return to

normal operation.

• During a listening session you may wish to

adjust the Bass Control

and Treble

Control

(

to suit your listening tastes or room

acoustics. Note that these controls are not effec-

tive with the 6-Channel Direct Input.

• To set the output of the AVR 4000 so that the

output is “flat,” with the Tone controls and the

Balance control de-activated, press the Tone

Mode button

button once or twice so that

the words Tone Outappear momentarily

in the Main Information Display

.To

return the tone controls to an active condition,

press the Tone Mode

button once or twice

so that the words Tone In momentarily

appear in the Main Information Display

• For private listening, plug the 6.3 mm stereo

phone plug from a pair of stereo headphones

into the front panel Headphone Jack

. Note

that when the headphone’s plug is connected,

the word HEADPHONE will scroll once

across the Main Information Display

and

all speakers will be silenced. When the head-

phone plug is removed, the audio feed to the

speakers will be restored.

min

OFF

i need circuit diagram for avr 4000 to repair the safety mood Submitted on 1-1-2023 at 14:31
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 4000 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 4000

Harman Kardon AVR 4000 User Manual - Dutch - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR 4000 Manual

Product: