8518
29
Zoom out
Zoom in
Previous page
1/58
Next page
OPERATION 29
Operation
Surround Mode Selection
One of the most important features of the
AVR 4000 is its ability to reproduce a full multi-
channel surround sound field from digital
sources, analog matrix surround encoded pro-
grams and standard stereo or even mono pro-
grams. In all, a total of thirteen listening modes
are available on the AVR 4000.
Selection of a surround mode is based on personal
taste, as well as the type of program source mate-
rial being used. For example, motion pictures or TV
programs bearing the logo of one of the major
surround encoding processes, such as Dolby
Surround, DTS Stereo or UltraStereo
††
should be
played in either the Dolby 3 Stereo or Dolby Pro
Logic surround modes depending on the source
material and speakers in use.
However to create wider, enveloping sound field
environments and more defined pans and
flyovers with all analog stereo and surround
recordings select Harman Kardon’s exclusive
Logic 7 mode, that creates a stereophonic left
and right rear signal, just as recorded in real life
(e.g. sound being recorded from left rear side will
be heard from that side only) for a dramatic
improvement in comparison to Dolby Pro Logic.
NOTE: Once a program has been encoded with
matrix surround information, it retains the sur-
round information as long as the program is
broadcast in stereo. Thus, movies with surround
sound may be decoded via any of the analog sur-
round modes such as Pro Logic or Logic 7, when
they are broadcast via conventional TV stations,
cable, pay TV and satellite transmission. In addi-
tion, a growing number of made-for-television
programs, sports broadcasts, radio dramas and
music CDs are also recorded in surround sound.
You may view a list of these programs at the Dolby
Laboratories Web site at www.dolby.com.
Even when a program is not listed as carrying
intentional surround information, you may find
that the Pro Logic, Dolby 3 Stereo or Logic 7
modes often deliver enveloping surround presen-
tations through the use of the natural surround
information present in all stereo recordings.
However, for stereo programs without any sur-
round information the Theater, Hall and 5CH
Stereo modes should be tried (5CH Stereo is effec-
tive particularly with old ”extreme” stereo record-
ings) and for mono programs, we suggest that you
try the Theater or Hall modes.And when you use
only two front channel speakers you should select
Harman’s patented VMAx mode, delivering a virtu-
ally three dimensional sound space with two
speakers only.
Surround modes are selected using either the
front panel controls or the remote. To select a
surround mode from the front panel, press the
Surround Mode Selector
7
to scroll through
the list of available modes. To select a surround
mode using the remote, press the Surround
Mode Selector
A
, and then press the
/
¤
buttons
D
to change the mode. As you press
the buttons, the Surround mode name will
appear in the Main Information Display
Y
,
and an individual mode indicator will also light
up
C D F H I J K L N
. As the sur-
round modes change, a green LED will light next
to the current mode in the Surround Mode
Indicators list
˜
on the front panel.
Note that the Dolby Digital or DTS modes may
only be selected when a digital input is in use. In
addition, when a digital source is present, the
AVR 4000 will automatically select and switch to
the correct mode (Dolby Digital or DTS), regard-
less of the mode that has been previously select-
ed. For more information on selecting digital
sources, see the following section of this manual.
To listen to a program in traditional two channel
stereo, using the front left and front right speak-
ers only (plus the subwoofer if installed and con-
figured), follow the instructions shown above for
using the remote until SURR OFF appears
in the Main Information Display
Y
.
Digital Audio Playback
Digital audio is a major advancement over past
systems such as Dolby Pro Logic. It delivers five dis-
crete channels: left front, center, right front, left sur-
round and right surround. Each channel reproduces
full frequency range (20Hz to 20kHz) and offers
dramatically improved dynamic range and signifi-
cant improvements to signal-to-noise ratios. In
addition, digital systems have the capability to
deliver an additional channel that is specifically
devoted to low frequency information.This is the
“.1” channel referred to when you see these sys-
tems descibed as “5.1”. The bass channel is sepa-
rate from the other channels, but since it is inten-
tionally bandwidth limited, sound designers have
given it that unique designation.
Dolby Digital
Dolby Digital (originally known as AC-3
®
) is
a standard part of DVD, and is available on
specially encoded LD discs and satellite broadcasts
and it is a part of the new high-definition television
(HDTV) system.
Note that an optional, external RF demodulator
is required to use the AVR 4000 to listen to the
Dolby Digital sound tracks available on laser
discs. Connect the RF output of the LD player to
the demodulator and then connect the digital
output of the demodulator to the Optical or
Coaxial inputs
RS#%
of the AVR 4000.
No demodulator is required for use with DVD
players or DTS-encoded laser discs.
DTS
DTS is another digital audio system that is capa-
ble of delivering 5.1 audio. Although both DTS
and Dolby Digital are digital, they use different
methods of encoding the signals, and thus they
require different decoding circuits to convert the
digital signals back to analog.
DTS-encoded sound tracks are available on select
DVD and LD discs, as well as on special audio-
only DTS CDs. You may use any LD, DVD or CD
player equipped with a digital output to play
DTS-encoded special audio-only CDs with the
AVR 4000, but DTS-LDs can be played on LD
players and DTS-DVDs on DVD players only. All
that is required is to connect the player’s output
to either the Optical or Coaxial input on the
rear panel
RS
or front panel
#%
.
In order to listen to DVDs encoded with DTS
sound tracks, the DVD player must be compatible
with the DTS signal as indicated by a DTS logo
on the player’s front panel. Note that early DVD
players may not be able to play DTS- encoded
DVDs. This does not indicate a problem with the
AVR 4000, as some players cannot pass the DTS
signal through to the digital outputs. If you are in
doubt as to the capability of your DVD player to
handle DTS DVDs, consult the player’s owner’s
manual.
PCM Audio Playback
PCM (Pulse Code Modulation) is the non- com-
pressed digital audio system used for compact
discs, Non-Dolby Digital/DTS Laserdiscs and some
special PCM encoded DVDs.The digital circuits in
the AVR 4000 are capable of high quality digital-
to-analog decoding, and they may be connected
directly to the digital audio output of your
CD/DVD or LD player (LD only for PCM or DTS
programs, for Dolby Digital laser discs an RF
adapter is needed, see ”Dolby Digital” above).
Connections may be made to either the Optical
or Coaxial inputs
RS
on the rear panel or the
front panel Digital Inputs
#%
.
To listen to a PCM digital source, first select the
input for the desired source (e.g., CD) to feed its
video signal (if any) to the TV monitor and to
provide its analog audio signal for recording.
Next press the Digital Select button
Ú
G
and then use the
/
¤
buttons
D
on the
remote, or the Selector buttons
5
on the front
panel, until the desired choice appears in the
Main Information Display
Y
, then press the
Set button
Ô
F
to confirm the choice.
When a PCM source is playing, the PCM indica-
tor
A
will light. During PCM playback you may
select any surround mode except Dolby Digital or
DTS.
Playback from PCM sources may also benefit
from the Logic 7. When playing a stereo or sur-
round-encoded PCM source, such as an LD or CD
29


Need help? Post your question in this forum.

Forumrules
1

Forum

harman-kardon-avr-4000

Reset search

  • i need circuit diagram for avr 4000 to repair the safety mood Submitted on 1-1-2023 at 14:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 4000 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 4000

Harman Kardon AVR 4000 User Manual - Dutch - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info