Manual Harman Kardon AVR 4000 (page 18 of 58) (English)

8518

Zoom out

Zoom in

1/58

18 INSTALLATION AND CONNECTIONS

Multiroom Audio Connections

Depending on the distance from the AVR 4000

to the remote room, two options (A and B) are

available for audio connection:

Option 1: Use high-quality, shielded stereo

audio interconnect cable with phono plugs on

both ends from the AVR 4000’s location to the

remote room. At the remote room, connect the

interconnect cable to a stereo power amplifier.

The amplifier will be connected to the room’s

speakers. No volume control is required, as the

AVR 4000 and the remote IR link will provide

that function. At the AVR 4000, plug the audio

interconnect cables into the Multi-Room

Output jacks

on the AVR 4000’s rear panel.

Option 2: Place the amplifier that will provide

power to the remote location speakers in the

same room as the AVR 4000, and connect the

Multiroom Output jacks

on the rear panel

of the AVR to the audio input of the remote

room amplifier. Use the appropriate speaker wire

to connect the optional power amplifier to the

remote speakers. High-quality wire of at least

2.5 mm

is recommended for long multiroom

connections.

IMPORTANT NOTE: Any cables run inside walls

should carry any certification that is required by

the local building and electrical codes.To avoid

interference, audio and speaker cables should not

be parallel to, or run in the same conduits or path

with,AC cables. If you have any questions about

multiroom wiring, consult your dealer, custom

installer or low-voltage electrical contractor.

External Audio Power Amplifier

Connections

If desired, the AVR 4000 may be connected to

optional, external audio power amplifiers.

When an external amplifier is used, connect the

Preamp Out jacks

to the inputs on the

amplifier. Note that when external amplifiers or

devices are used, the volume control is still con-

trolled by the AVR, although additional volume

controls on the external device may impact the

volume settings and output levels from the AVR.

External Audio Decoder Connection

To provide for ultimate flexibility, the AVR 4000

may be used in conjunction with optional, exter-

nal decoders for digital audio systems other than

the AVR 4000’s own built-in Dolby Digital and

DTS decoding system or with DVD players hav-

ing those decoders integrated. If an external

decoder is used, connect the output jacks of the

decoder to the 6-Channel Direct inputs

making sure to match channels.

These jacks may also be used for connections to

devices such as DVD players or High Definition

Television (HDTV) sets or decoders that feature

built-in digital surround decoders. Although the

digital decoding system in the AVR 4000 will typi-

cally provide audio performance that is superior to

other decoders, you may use these jacks to provide

an additional 6-channel input for connection to a

DVD player or HDTV set with a built-in decoder

and discrete 6-channel analog outputs.

AC Power Connections

This unit is equipped with two accessory AC out-

lets. They may be used to power accessory

devices, but they should not be used with high-

current draw equipment such as power ampli-

fiers. The total power draw to the Unswitched

Outlet

must not exceed 100 watts, that to

the Switched Outlet

50 watts.

The Switched

outlet will receive power only

when the unit is on completely. This is recom-

mended for devices that have no power switch

or a mechanical power switch that may be left in

the “ON” position.

NOTE: Many audio and video products go into a

Standby mode when they are used with

switched outlets, and cannot be fully turned on

using the outlet alone without a remote control

command.

The Unswitched

outlet will receive power

as long as the unit is plugged into a powered AC

outlet and the Main Power Switch

is on.

Finally, when all connections are complete, plug

the power cord into a nonswitched 220-240-volt

AC wall outlet.You’re almost ready to enjoy the

AVR 4000!

Installation and Connections

i need circuit diagram for avr 4000 to repair the safety mood Submitted on 1-1-2023 at 14:31
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 4000 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 4000

Harman Kardon AVR 4000 User Manual - Dutch - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR 4000 Manual

Product: