Manual Harman Kardon AVR 4000 (page 20 of 58) (English)

8518

Zoom out

Zoom in

1/58

20 SYSTEM CONFIGURATION

System Configuration

First Turn On and Use of the OSD

Once the speakers have been placed in the

room and connected, the remaining steps are to

program the system configuration memories.

With the AVR 4000 two kind of memories are

used, those associated individually with the

input selected, e.g. surround modes, and others

working independently from any input selected

like speaker output levels, crossover frequencies

or delay times used by the surround sound

processor.

You are now ready to power up the AVR 4000 to

begin these final adjustments.

1. Plug the Power Cable

into an un-

switched AC outlet.

2. Press the Main Power Switch

in until it

latches and the word “OFF” on the top of the

switch disappears inside the front panel. Note

that the Power Indicator

will turn amber,

indicating that the unit is in the Standby mode.

3. Install the three supplied AAA batteries in the

remote as shown. Be certain to follow the (+)

and (–) polarity indicators that are on the bot-

tom of the battery compartment.

4.Turn the AVR 4000 on either by pressing the

System Power Control

or the Input

Source Selector

on the front panel, or via

the remote by pressing the AVR Selector

or any of the Input Selectors

on the

remote. The Power Indicator

will turn green

to confirm that the unit is on, and the Main

Information Display

will also light up.

Using the On-Screen Display

When making the following adjustments, you

may find them easier to make via the unit’s on-

screen display system. These easy-to-read dis-

plays give you a clear picture of the current sta-

tus of the unit and facilitate speaker, delay, input

or digital selection you are making.

To view the on-screen displays, make certain you

have made a connection from the Video

Monitor Out jack

on the rear panel to the

composite or S-Video input of your TV or projec-

tor. In order to view the AVR’s displays, the cor-

rect video input must be selected on your video

display.

IMPORTANT NOTE: When viewing the displays

on a projection TV it is important that they not be

left on the screen for an extended period of time.

As with any video display, but particularly with

projectors, constant display of a static image such

as these menus or video game images may cause

the image to be permanently “burned into” the

CRT.This type of damage is not covered by the

AVR 4000 warranty and may not be covered by

the projector TV set’s warranty.

The AVR 4000 has two on-screen display modes,

“Semi-OSD” and “Full-OSD.” When making con-

figuration adjustments, it is recommended that

the Full-OSD mode be used. This will place a

complete status report or option listing on the

screen, making it easier to view the available

options and make the settings on the screen. The

Semi-OSD mode uses one-line displays only.

Note that when the full OSD system is in use,

the menu selections are not shown in the

Information Display

ÛY

. When the full

OSD menu system is used, OSD ON will appear

in the Main Information Display

and the

OSD Indicator

will illuminate to remind you

that a video display must be used.

When the semi-OSD system is used in conjunc-

tion with the discrete configuration buttons, the

on screen display will show a single line of text

with the current menu selection. That selection

will also be shown in the Main Information

Display

Selecting the On-Screen display

The full OSD system is always available by press-

ing the OSD button

. When this button is

pressed the MASTER MENU (Figure 1)

will appear, and adjustments are made from the

individual menus. Note that the menus will

remain on the screen for 20 seconds after the

latest action was made on the screen menu,

then they will “time-out” and disappear from

the screen. The time-out may be increased to as

much as 50 seconds by going to the

ADVANCED SELECT menu, and

changing the item titled FULL OSD

TIME OUT.

The semi-OSD system is also available as a sys-

tem default, although it may be turned off by

using the ADVANCED SELECT menu.

(See page 36). With the semi-OSD system, you

may make adjustments directly, by pressing the

buttons on the front panel or remote control for

the specific parameter to be adjusted as outlined

above.

Figure 1

Settings to be Made With Each

Input Used

The AVR 4000 features an advanced memory

system that enables you to establish different

configurations for the speaker configuration, dig-

ital input and surround mode for each input

source. This flexibility enables you to custom tai-

lor the way in which you listen to each source

and have the AVR 4000 memorize them.This

means, for example, that you may associate dif-

ferent surround modes and analog or digital

inputs with different sources, or set different

speaker configurations with the resultant

changes to the bass management system. Once

these settings are made, they will automatically

be recalled whenever you select an input.

The default settings for the AVR 4000, as it is

shipped from the factory, have all inputs set for

an analog source, with stereo as the surround

mode, the front left and right speakers set to

“large” (with surround modes other speakers to

”small”), and a subwoofer connected. Before

using the unit, you will probably want to change

these settings for most inputs so that they are

properly configured to reflect the use of digital

or analog inputs, the type of speakers installed

and the surround mode specifics. Remember,

since the AVR 4000’s memory system keeps the

settings for each input separate from the other

inputs, you will need to make these adjustments

for each input used. However, once they are

made, further adjustment is only required when

system components are changed.

To make this process as quick and as easy as

possible, we suggest that you use the full-OSD

system with the on-screen menus, and step

through each input. Once you have completed

the settings for the first input, many settings

may be duplicated for the remaining inputs. It is

also a good idea to set the configuration data in

the order these items are listed in the Main

Audio Setup Menu, as some settings require a

specific entry in a prior menu item.

The items that follow will describe the individual

settings required for each input. Remember that

once the settings are made for one input, they

must be made for all other input sources in your

system.

* MASTER MENU *

IN/OUT SETUP

SURROUND SETUP

SPEAKER SETUP

OUTPUT ADJUST

CHANNEL ADJUST

MULTI-ROOM

ADVANCED

EXIT

i need circuit diagram for avr 4000 to repair the safety mood Submitted on 1-1-2023 at 14:31
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 4000 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 4000

Harman Kardon AVR 4000 User Manual - Dutch - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR 4000 Manual

Product: