519139

Hanseatic XL 25 T Manual

30
Zoom out
Zoom in
Previous page
1/40
Next page
GB-2
Petrol trimmer
Ratings
Model XL 25 T
Engine output kW / HP 0.8 / 1.1
Engine type 2-stroke
Cubic capacity cm
3
25
Fuel lubricated petrol 40:1
Tank volume ml 600
Maximum engine speed min
-1
10.500
Idling speed min
-1
3.000
Max. speed of the cutting tool min
-1
9.000
Fuel consumption kg/h 0.38
Cutting diameter cm 43
Cord diameter mm 2.0
Overall cord length m 2 x 3
Cord extension Tap’n go
Weight kg 4,5
Acoustic capacity level dB(A) 112
Sound pressure level (acc. to EN 27917) dB (A) 98,2
Vibration – full throttle (acc. to EN ISO 7916) m/s
2
6,35
Vibration – idling (acc. to EN ISO 7916
) m/s
2
9,57
Cutting attachments (type) Nylon line cutting head
Technical changes reserved.
The devices are manufactured in accordance with the provisions of DIN EN ISO 11806 and fully comply with the
provisions of the German Equipment and Product Safety Act.
SAFETY INSTRUCTIONS
Information on noise emission in accordance with
“Machine Noise Information Ordinance 3. GPSGV
and Machinery Directives: The noise level at the
workplace may exceed 85 dB (A). In this case, noise
protection measures for the operator are required
(e.g., wearing of ear protection).
Attention: Noise protection ! Please observe the
local regulations when operating your device.
BEFORE OPERATION
• Always keep these Operating Instructions to hand
together with your petrol trimmer.
• Read the instructions carefully. Familiarise with
the control elements so that you are able to safely
operate the device.
• Children and juveniles are not allowed to operate
the device – except for juveniles working with the
device under the guidance and supervision of an
adult who is familiar with the device.
• Before each use of the device, check whether the
cutting head is attached correctly and that the throttle
lever returns to zero position automatically.
• All protection covers and safety devices must be
correctly attached to operate the device.
• Thoroughly check the device for loose or defective
parts before each use. Only start working with the
device when all required repairs and settings
have been effected.
• Use the device only during daylight or in sufciently
strong articial light.
• Take care that no other persons are standing within
a radius of 15m around your working area.
• Adjust the handle to your body height before starting
the device and make sure that the cutting head is
not in touch with any objects.
• Be aware of the possible dangers to your head,
hands and feed that may develop.
• Carefully check the area to be cut down. Remove
any fallen leaves that may get caught in the cutting
cord. Also remove any objects that may be hurled
away during cutting.
SAFETY INSTRUCTIONS FOR PETROL-POWERED
TRIMMERS AND BRUSHCUTTERS
WARNING: Petrol is extremely ammable and its
fumes may explode when ignited. Take care of the
following:
1) Store petrol in containers designed and approved
for the storage of such substances only.
2) Always switch off the engine and let it cool down
before you rell the tank. As long as the engine is
hot you must never remove the tank cap or rell
the tank.
3) In the tank pressure may develop. Loosen the
tank cap slowly to allow this pressure to gradually
decrease.
4) Refuel the device in a clean, well-ventilated room
only. Immediately wipe off spilled-over fuel. In such
a case, you must keep all sources of ignition away
from the device and wait with the starting of the
engine until the fuel has evaporated.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic XL 25 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic XL 25 T in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info