Manual Hanseatic WQP12-7709H (page 57 of 64) (English, German)

711515

Zoom out

Zoom in

1/64

Page EN-25

Connecting and adjusting

Insert a screwdriver into one of the slots

and turn the feet to the height required.

7. You can adjust the height of the back

foot with the centre adjusting screw. Use

a Phillips-tip screwdriver for this.

8. Check the alignment with a spirit level.

9. Make sure the top edge of the dishwash-

er is level with the bottom edge of the

worktop to prevent it from tipping forward

when you open the dishwasher door.

Screw the dishwasher to the kitchen

units

⑤

⑥

a) For granite worktops, remove the internal

side cover caps ⑥ and screw the dish-

washer to the side kitchen cupboards.

Cover the screws again with the cover

caps.

b) For all other worktops, screw the mount-

ing bracket ⑤ to the work surface until it is

fixed.

Connecting and adjusting

Connecting the dishwasher to

the electricity

WARNING

Risk of electric shock!

Improper handling of the network connec-

tion may result in an electric shock or short

circuit.

■ Never use multi-socket adapters, mul-

ti-socket strips, travel adapters or the

like.

■ We recommend using a pulse-sensitive

residual current device (RCD).

• Insert the mains plug in the properly in-

stalled socket (220–240 V~ / 50 Hz, 10 A).

Set the water hardness

Hard water will cause calcification within the

dishwasher. Also, more dishwasher deter-

gent will be required to clean the dishes. Soft

water increases foaming. For this reason, the

degree of hardness of the water has to be

determined and adjusted even before the first

use.

Determining the degree of hardness

– Take the degree of hardness from the wa-

ter bill or

– ask your local water company for the de-

gree of hardness or

– determine the hardness level using the en-

closed test strip (see table for result „Hard-

ness level table“ on page EN-26).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP12-7709H in the language / languages: English, German as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hanseatic WQP12-7709H Manual

Product: