Manual Hanseatic WQP12-7709H (page 55 of 64) (English, German)

711515

Zoom out

Zoom in

1/64

Page EN-23

Installation

Option A:

Direct connection to the odour seal (siphon)

of your washing/dishwashing basin. The out-

let hose must be a maximum of 1000 mm

above the floor.

Option B:

Connection to a floor drain.

Connecting the inlet hose

NOTICE

Risk of damage!

The dishwasher is designed for a water

pressure of 0.4 bar to 10 bar (0.04 MPa

to1.0MPa). Water must always be able to

run freely into the dishwasher, otherwise

this can damage the appliance.

■ For water pressure of less than 10 bar, in-

stall a pressure reducer (in case of doubt,

seek information from the water supply

company).

■ Never connect the appliance to the wa-

ter tap or the mixing arm of a water heat-

er (e.g. continuous ﬂ ow heater, pres-

sure-free boiler etc.).

■ Ensure that the inlet hose is correct-

ly connected and is not kinked or dam-

aged.

■ Do not damage the inlet hose; it con-

tains electrical components. If the inlet

hose is damaged, contact our service de-

partment (see „Service department“ on

page EN-29).

¾ inch

Rubber seal

Inlet hose

For water supply, you need a water tap with

a ¾ inch screw connector.

– Screw the safety valve lock nut to the tap

hand-tight.

– Check that the connection to the water tap

is sealed. Turn on the water tap slowly and

ensure that no water is escaping. Then

close the valve again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic WQP12-7709H in the language / languages: English, German as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hanseatic WQP12-7709H Manual

Product: