713574
44
Zoom out
Zoom in
Previous page
1/64
Next page
Operation
Before getting started
Read chapter „Safety“ from page EN-6, in
particular all the safety notices.
Set up and connect the appliance as de-
scribed in chapter „Before starting to use
the appliance“ from page EN-22.
Switching the appliance on
and off
NOTICE
Risk of damage!
If the refrigerating appliance has been
transported horizontally, lubricant from
the compressor may make its way into
the cooling circuit.
Allow the refrigerating appliance to
stand upright for 2 hours before start-
up. The lubricant will fl ow back into
the compressor during this time.
Switching on
1. Insert the mains plug into an easily acces-
sible socket (220-240 V~ / 50 Hz).
The appliance is switched on.
The compressor starts to work, the re-
frigerant flows through the pipes and a
quiet humming sound can be heard.
All indicators will illuminate on the dis-
play for a few seconds.
A few seconds later, the previously se-
lected temperature and operating mode
will light up.
2. If the appliance makes worrying noises,
check the solid base and remove any ob-
jects that may be on top of the appliance.
The appliance is checked for func-
tionality before being delivered. The
most recently made settings are
retained.
Operation
Switching off
1. Pull the mains plug out of the socket.
The compressor is switched off. The appli-
ance no longer refrigerates.
2. Empty the appliance and clean it (see
“Care and maintenance” on page EN-20).
3. Leave the appliance door slightly open to
prevent mould from forming.
Configuring operating mode
The appliance operates in freezing mode. It
can also operate in cooling mode.
1. Check the operating mode and tempera-
ture setting before using appliance.
Freezing mode is displayed on the control
panel’s right side and the cooling mode on
the left side.
Freezing mode example:
N
o Frost
8
-1
6
6
-1
8
4
-20
3
-2
2
2
-2
4
°
C
F
RID
G
E
FREEZER
H
old
3
sec
.
The last freezing temperature setting used
illuminates on the control panel’s right side
(temperature is set at −18°C in the example).
2. To select the operating mode, press the
FRID
GE
FREEZER
H
old
3
sec
.
(11) button for 3 seconds.
The last temperature setting used for the
newly selected operating mode illuminates.
OperationSeite EN-12
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hanseatic HGS17260A2NF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hanseatic HGS17260A2NF in the language / languages: English, German as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info