813561

HammerSmith M22606 Multitool Manual

15
Zoom out
Zoom in
Previous page
1/64
Next page
14
15
If the liquid comes into contact with the eyes, seek
medical attention immediately. Liquids that leak from
batteries can cause skin irritation and burns.
• This device is designed for household and personal
use only.
5. MAINTENANCE
• Do not try to repair the device yourself, and ensure
that repairs are only ever carried out by an authorized
specialist dealer.
• Use only original replacement parts. This guarantees
that the safety of the device is maintained.
The operation and use are entirely the responsibility of
the user.
ADDITIONAL SAFETY RULES
• Always use protective goggles or glasses.
• Never use the Hammersmith MultiTool if it is wet.
• Wear hearing protection during prolonged use.
• Wear a dust mask when operating in a dusty
environment.
• Before sanding, make sure that any nails, screws or
other metal objects protruding from the workpiece
have been removed.
• Always inspect walls and ceilings before drilling and
screwing to avoid damage to potentially concealed
power cables and pipes.
• Use screw clamps or other suitable clamping devices
to fix the workpiece firmly to the surface and to
prevent it from slipping.
• Only use attachments that are supplied for the
Hammersmith MultiTool.
• Do not use broken, damaged or worn accessories or
attachments. Only use attachments that are in good
working condition.
• Always start the device in a suitable space, and allow
it to reach the optimum speed before introducing it to
the workpiece.
• Always remove the battery pack from the device
before changing attachments.
• Keep your hands out of the work area, and always cut
away from yourself and other people.
• Wear hearing protection when using the
percussion drill. Exposure to noise can cause
hearing loss.
• Never work at a higher speed than the maximum
rated speed of the drill bit.
• Always start drilling at a low speed and with the
drill bit in contact with the workpiece.
• Only apply pressure in a direct line with the bit,
and never apply excessive pressure.
• For applications that generate a lot of dust, such
as percussion and diamond core drilling, ensure
that there is sufficient dust extraction.
CHARGING, INSERTING AND REMOVING THE
BATTERY PACK (see Figure 4/A-C)
The quick-charge battery station is designed in
such a way that the battery set can be charged
within an hour, although this depends on the
respective battery set.
1. Plug the charger into a suitable socket before
inserting the battery pack.
2. Insert the battery pack into the charger.
3. A red light indicates that the battery pack is
being charged.
4. A green light indicates that the charging process
is complete. The battery pack is now fully
charged, and can be used or left on the charger.
Charge the battery set immediately after use to avoid
shortening the service life of the battery. In order to
extend the service life, make sure that the battery pack
is never completely empty. We recommend charging
the battery pack after each use. (see Figure 5)
If you want to know how much battery capacity
remains in the battery pack during use, press the
battery level indicator button. (see Figure 6)
LEAVING THE BATTERY PACK CONNECTED TO
THE CHARGER
M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 15M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 15 20.07.22 12:2120.07.22 12:21
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HammerSmith M22606 Multitool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HammerSmith M22606 Multitool in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info