Manual HammerSmith M22606 Multitool (page 14 of 64) (English, German, Dutch, French, Italian, Spanish)

813561

Zoom out

Zoom in

1/64

turned to ON can lead to accidents.

• Remove the adjustment key before switching on the

device. If a wrench or adjustment key is left on the

rotating part of the power section, this can lead to

injuries.

• Do not over-tighten the attachment. Always make

sure that you can maintain a strong and balanced

stance. This assures better control in unexpected

situations.

• Do not over-estimate your capacities. Make sure

you have a secure stance and balance at all times.

This allows for better control over the device in

unforeseen situations.

• Wear appropriate clothing. Do not wear loose

clothing or jewellery. Make sure that hair, clothing

and gloves cannot become caught in the moving

parts.

• Never work at a higher speed than the maximum

rated speed of the drill bit.

• Always start drilling at a low speed and with the

drill bit in contact with the workpiece.

• Only apply pressure in a direct line with the bit,

and never apply excessive pressure.

4. USE AND CARE OF THE DEVICE

• Use the correct device conﬁguration for the

respective application. A properly conﬁgured device

will allow better execution of the task and is safer for

the intended purpose.

• Do not use the device if the on/oﬀ switch is not

working correctly. Any device that cannot be

switched on and oﬀ with the switch is dangerous and

must be repaired immediately by a specialist dealer.

• Remove the battery pack from the device before

altering settings, replacing accessories or storing

tools. These safety measures help to avoid the risk of

the device switching itself on unintentionally.

• The device may only be used by children who

are 8 years of age or older and by people with

limited physical, sensory or mental capabilities

or a lack of experience and knowledge if they

are supervised or have received appropriate

instruction on how to use the device, to operate

the device safely and in accordance with

regulations, and have been adequately informed

of all dangers that may arise from its use.

• Cleaning and user care must not be carried out by

children unless they are older than 8 years of age and

are supervised.

• Maintenance of the device. Make sure that moving

parts are correctly attached, ﬁrmly in place, and free

from damage that could impair the functionality of

the device. If the device is damaged, you must have it

repaired by an authorized dealer.

• Keep the cutting tools clean and fresh. Properly

maintained cutting tools with sharp blades are less

likely to become clogged and are easier to control.

• Use the device and accessories in accordance with

these instructions, taking into account the working

conditions and the task to be performed. Using the

device for work for which it is not intended can lead

to dangerous situations.

• Only ever charge the battery using the charger

provided by the manufacturer.

• A charger designed for a diﬀerent battery pack can

create a ﬁre hazard if it is used for charging.

• When the battery pack is not in use, keep it away

from other metal objects as these could potentially

short-circuit the poles of the battery. If the poles of

the battery are connected to one another, a ﬁre or ﬁre

may result.

• In the event of improper working and storage

conditions, liquid can escape from the battery. Avoid

this coming into contact with the skin under all

circumstances. If you accidentally come into contact

with the liquid, rinse it oﬀ immediately with water.

M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 14M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 14 20.07.22 12:2120.07.22 12:21

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HammerSmith M22606 Multitool in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3.76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HammerSmith M22606 Multitool Manual

Product: