Manual HammerSmith M22606 Multitool (page 17 of 64) (English, German, Dutch, French, Italian, Spanish)

813561

Zoom out

Zoom in

1/64

Note: The oscillating attachment is suitable for

cutting wood or plasterboard but not for cutting

stone or concrete walls.

1. Select the desired angle for the application.

2. Position the holes of the oscillating accessory

over the ﬁxing pins of the mounting plate.

3. Make sure that the accessory lies ﬂat on the

surface of the mounting plate.

4. Place the washer in the inner opening of the

oscillation accessory.

Note: Make sure that the ﬂat side of the washer

that holds the oscillating accessory faces the

accessory.

5. Insert the fastening screw through the washer

into the rotary spindle of the oscillating

attachment.

6. Use the Allen key to tighten the fastening screw

by turning it clockwise. Do not overtighten

A. Sanding

The Delta sanding plate is ﬁtted with Velcro fabric

for quick attachment of the sanding sheets.

Clean the sanding plate before attaching the

sanding sheet.

1. Attaching the sanding sheet: Press the sanding

sheet evenly onto the sanding plate. Make sure

that the punched holes in the sanding sheet

match up with the holes in the sanding plate.

2. Removing the sanding sheet: Simply pull the

sanding sheet oﬀ the sanding plate.

Note: Always wear suitable clothing and

protective equipment when working with the

device. Ensure that the device works correctly

before every use. Personal protective

equipment and a correctly functioning device

reduce the risk of injuries and accidents.

After switching on, move the device so that it

comes into contact with the workpiece. In order to

achieve optimal sanding results, only ever work

with sanding sheets that are in perfect condition.

Apply light and even pressure while working. This

protects the device and sanding sheet. Do not use

the same sanding sheet to sand diﬀerent materials

(e.g. metal and then wood).

Selection of the sanding sheet

(95 mm x 95 mm x 95 mm)

P60 for rough sanding

P120 for ﬁnishing

P240 for ﬁne sanding

B. Sawing with the oscillating saw blade

Always wear eye protection. Use only undamaged

saw blades that are in full working order. Make sure

that you have a secure footing and hold the device

ﬁrmly with both hands at a suﬃcient distance from

your body. Before you saw the workpiece, ﬁrst check

that no foreign objects such as nails and screws are

present. These must be removed before starting

work. It is only intended for cutting soft materials,

such as wood or plasterboard.

THE OSCILLATING SAW IS NOT SUITABLE FOR

CUTTING INTO STONE OR CONCRETE WALLS.

C. Scraping with the oscillating scraper

Old carpet adhesive and wallpaper residues can be

removed smoothly with the help of the oscillating

scraper. Always work at the correct angle, so as not

to damage the carrier material.

This symbol means that such electrical

equipment or batteries must not be

disposed of with normal household

waste. You are legally obliged to hand in such items -

free of charge - to a public collection point or distributor-

created collection point for the recycling of electrical

devices and expired bulbs and batteries within the scope

of the Electrical and Electronic Equipment Act that are

not encapsulated by or ﬁxed into the appliance, and can

be removed or separated from the appliance non-

destructively, for disposal at the end of their service life.

Use rechargeable batteries instead of single-use

batteries wherever possible. The recovery and recycling

of old appliances makes an important contribution to

protecting our environment. Improper disposal can

result in toxic substances being released into the

environment, which can have harmful eﬀects upon

people, animals and plants. Batteries with an increased

pollutant content are also marked with the following

symbols: Cd = cadmium, Hg = mercury, Pb = lead.

Consumers are themselves responsible for deleting any

personal data from appliances.

This product complies with the European

directives.

Protection rating II

SPECIFICATIONS:

The product must be stored in a dry place and must

not be exposed to direct sunlight during transport.

Operating temperatures and humidity: 10 - 35°C ≤

65% relative humidity

Temperature and humidity for storing the tool:

M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 17M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 17 20.07.22 12:2120.07.22 12:21

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HammerSmith M22606 Multitool in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3.76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HammerSmith M22606 Multitool Manual

Product: