683782
16
Zoom out
Zoom in
Previous page
1/38
Next page
O Key for water flow raising
is used to increase the water quan-
tity supplied up to max. 5.5 liters/
minute.
P Key for brush drive, suction
turbine with pilot lamp (green)
turns the brush drive assembly
and the squeegee ON/OFF with a
simultaneous lowering/lifting of the
brush head and the squeegee. The
green pilot lamp alights if the units
are ON and lowered. In case of a
malfunction the fault lamp (F)
alights and the error code appears
in the service display.
1 Drain hose for soiled water
is used for draining the soiled
water.
Note: When work is finished, the
soiled water tank has to be drained
and rinsed.
Drainage of soiled water: Unhinge
the drain hose and open the seal.
The quantity drained-off can be
regulated by rotation of the seal,
which is completely opened, if
required, by swiveling.
Re-close the seal by rotation to the
stop, and attach the drain hose.
2 Connection for water hose
of additional scrubbing and
vacuuming tool
is used for connection of the water
hose. The vacuuming hose has to
be linked with the unit’s vacuuming
hose by means of a cylindrical
adaptation.
48
II
1 Drain hose for soiled water
2 Connection for additional scrubbing and
vacuuming tool
3 Drain hose for fresh water
1
2
3
O Key for water flow raising
is used to increase the water quan-
tity supplied up to max. 5.5 liters/
minute.
P Key for brush drive, suction
turbine with pilot lamp (green)
turns the brush drive assembly
and the squeegee ON/OFF with a
simultaneous lowering/lifting of the
brush head and the squeegee. The
green pilot lamp alights if the units
are ON and lowered. In case of a
malfunction the fault lamp (F)
alights and the error code appears
in the service display.
1 Drain hose for soiled water
is used for draining the soiled
water.
Note: When work is finished, the
soiled water tank has to be drained
and rinsed.
Drainage of soiled water: Unhinge
the drain hose and open the seal.
The quantity drained-off can be
regulated by rotation of the seal,
which is completely opened, if
required, by swiveling.
Re-close the seal by rotation to the
stop, and attach the drain hose.
2 Connection for water hose
of additional scrubbing and
vacuuming tool
is used for connection of the water
hose. The vacuuming hose has to
be linked with the unit’s vacuuming
hose by means of a cylindrical
adaptation.
48
II
1 Drain hose for soiled water
2 Connection for additional scrubbing and
vacuuming tool
3 Drain hose for fresh water
1
2
3
O Key for water flow raising
is used to increase the water quan-
tity supplied up to max. 5.5 liters/
minute.
P Key for brush drive, suction
turbine with pilot lamp (green)
turns the brush drive assembly
and the squeegee ON/OFF with a
simultaneous lowering/lifting of the
brush head and the squeegee. The
green pilot lamp alights if the units
are ON and lowered. In case of a
malfunction the fault lamp (F)
alights and the error code appears
in the service display.
1 Drain hose for soiled water
is used for draining the soiled
water.
Note: When work is finished, the
soiled water tank has to be drained
and rinsed.
Drainage of soiled water: Unhinge
the drain hose and open the seal.
The quantity drained-off can be
regulated by rotation of the seal,
which is completely opened, if
required, by swiveling.
Re-close the seal by rotation to the
stop, and attach the drain hose.
2 Connection for water hose
of additional scrubbing and
vacuuming tool
is used for connection of the water
hose. The vacuuming hose has to
be linked with the unit’s vacuuming
hose by means of a cylindrical
adaptation.
48
II
1 Drain hose for soiled water
2 Connection for additional scrubbing and
vacuuming tool
3 Drain hose for fresh water
1
2
3
O Key for water flow raising
is used to increase the water quan-
tity supplied up to max. 5.5 liters/
minute.
P Key for brush drive, suction
turbine with pilot lamp (green)
turns the brush drive assembly
and the squeegee ON/OFF with a
simultaneous lowering/lifting of the
brush head and the squeegee. The
green pilot lamp alights if the units
are ON and lowered. In case of a
malfunction the fault lamp (F)
alights and the error code appears
in the service display.
1 Drain hose for soiled water
is used for draining the soiled
water.
Note: When work is finished, the
soiled water tank has to be drained
and rinsed.
Drainage of soiled water: Unhinge
the drain hose and open the seal.
The quantity drained-off can be
regulated by rotation of the seal,
which is completely opened, if
required, by swiveling.
Re-close the seal by rotation to the
stop, and attach the drain hose.
2 Connection for water hose
of additional scrubbing and
vacuuming tool
is used for connection of the water
hose. The vacuuming hose has to
be linked with the unit’s vacuuming
hose by means of a cylindrical
adaptation.
48
II
1 Drain hose for soiled water
2 Connection for additional scrubbing and
vacuuming tool
3 Drain hose for fresh water
1
2
3
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hako Scrubmaster B140R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hako Scrubmaster B140R in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info