683782
18
Zoom out
Zoom in
Previous page
1/38
Next page
Working with the
Hakomatic B 910
The driver has to read this manual
carefully. The operation elements are
represented by comprehensible sym-
bols and facilitate familiarization.
Proceed to the first driving trials on a
clear training ground or road until the
driver is acquainted with the elements
and their functions.
Comply with the following
safety instructions
When using the Hakomatic B 910, the
safety instruction generally applicable
for using self-propelled working ma-
chines have to be complied with.
Transporting persons on the Hako-
matic B 910 is strictly prohibited.
The warning and instruction plates
attached to the Hakomatic give im-
portant advice about safe operation.
Complying with the instructions is
essential for your safety.
Before starting to work, the operator
has to check that the Hakomatic B 910
and its working implements are in
proper and safe operating condition.
Do not operate the Hakomatic B 910
without protective devices being
installed.
Detergents
Important note:
Use only detergents suitable for auto-
matic machines (low foaming). We
recommend using our agents for
cleaning and care, which are adapted
to the Hakomatic B 910. Those pro-
ducts comply with the provisions of
the Detergents Act (WRMG applicable
in Germany).
Comply with the instructions for cor-
rect dosage of detergent.
If there is much foam, this will affect
the performance of the machine.
Actually it indicates that there is ex-
cessive dosage or improper suitability
of detergent for the existing kind of
dirt. Detergent particles contained in
the soiled water and not being used
will cause formation of foam.
Please take the manufacturer’s
recommendations as a first basis.
Tests made by yourself in practice
then soon will make you find the ideal
detergent and the perfect dosage
applicable to it.
Correct dosage will help you to save
money and to take care of the en-
vironment.
Refilling the
fresh water tank
Open tank cover (III/1) and protect
with the supporting bar (III/2)
Refill fresh water according to the
requirements into the tank (III/3)
with a max. temperature of 50°C.
Add detergent according to the
manufacturer’s instruction.
Note: in the soiled water tank the
filling level must not get beyond the
maximum mark.
50
Working with the
Hakomatic B 910
The driver has to read this manual
carefully. The operation elements are
represented by comprehensible sym-
bols and facilitate familiarization.
Proceed to the first driving trials on a
clear training ground or road until the
driver is acquainted with the elements
and their functions.
Comply with the following
safety instructions
When using the Hakomatic B 910, the
safety instruction generally applicable
for using self-propelled working ma-
chines have to be complied with.
Transporting persons on the Hako-
matic B 910 is strictly prohibited.
The warning and instruction plates
attached to the Hakomatic give im-
portant advice about safe operation.
Complying with the instructions is
essential for your safety.
Before starting to work, the operator
has to check that the Hakomatic B 910
and its working implements are in
proper and safe operating condition.
Do not operate the Hakomatic B 910
without protective devices being
installed.
Detergents
Important note:
Use only detergents suitable for auto-
matic machines (low foaming). We
recommend using our agents for
cleaning and care, which are adapted
to the Hakomatic B 910. Those pro-
ducts comply with the provisions of
the Detergents Act (WRMG applicable
in Germany).
Comply with the instructions for cor-
rect dosage of detergent.
If there is much foam, this will affect
the performance of the machine.
Actually it indicates that there is ex-
cessive dosage or improper suitability
of detergent for the existing kind of
dirt. Detergent particles contained in
the soiled water and not being used
will cause formation of foam.
Please take the manufacturer’s
recommendations as a first basis.
Tests made by yourself in practice
then soon will make you find the ideal
detergent and the perfect dosage
applicable to it.
Correct dosage will help you to save
money and to take care of the en-
vironment.
Refilling the
fresh water tank
Open tank cover (III/1) and protect
with the supporting bar (III/2)
Refill fresh water according to the
requirements into the tank (III/3)
with a max. temperature of 50°C.
Add detergent according to the
manufacturer’s instruction.
Note: in the soiled water tank the
filling level must not get beyond the
maximum mark.
50
Working with the
Hakomatic B 910
The driver has to read this manual
carefully. The operation elements are
represented by comprehensible sym-
bols and facilitate familiarization.
Proceed to the first driving trials on a
clear training ground or road until the
driver is acquainted with the elements
and their functions.
Comply with the following
safety instructions
When using the Hakomatic B 910, the
safety instruction generally applicable
for using self-propelled working ma-
chines have to be complied with.
Transporting persons on the Hako-
matic B 910 is strictly prohibited.
The warning and instruction plates
attached to the Hakomatic give im-
portant advice about safe operation.
Complying with the instructions is
essential for your safety.
Before starting to work, the operator
has to check that the Hakomatic B 910
and its working implements are in
proper and safe operating condition.
Do not operate the Hakomatic B 910
without protective devices being
installed.
Detergents
Important note:
Use only detergents suitable for auto-
matic machines (low foaming). We
recommend using our agents for
cleaning and care, which are adapted
to the Hakomatic B 910. Those pro-
ducts comply with the provisions of
the Detergents Act (WRMG applicable
in Germany).
Comply with the instructions for cor-
rect dosage of detergent.
If there is much foam, this will affect
the performance of the machine.
Actually it indicates that there is ex-
cessive dosage or improper suitability
of detergent for the existing kind of
dirt. Detergent particles contained in
the soiled water and not being used
will cause formation of foam.
Please take the manufacturer’s
recommendations as a first basis.
Tests made by yourself in practice
then soon will make you find the ideal
detergent and the perfect dosage
applicable to it.
Correct dosage will help you to save
money and to take care of the en-
vironment.
Refilling the
fresh water tank
Open tank cover (III/1) and protect
with the supporting bar (III/2)
Refill fresh water according to the
requirements into the tank (III/3)
with a max. temperature of 50°C.
Add detergent according to the
manufacturer’s instruction.
Note: in the soiled water tank the
filling level must not get beyond the
maximum mark.
50
Working with the
Hakomatic B 910
The driver has to read this manual
carefully. The operation elements are
represented by comprehensible sym-
bols and facilitate familiarization.
Proceed to the first driving trials on a
clear training ground or road until the
driver is acquainted with the elements
and their functions.
Comply with the following
safety instructions
When using the Hakomatic B 910, the
safety instruction generally applicable
for using self-propelled working ma-
chines have to be complied with.
Transporting persons on the Hako-
matic B 910 is strictly prohibited.
The warning and instruction plates
attached to the Hakomatic give im-
portant advice about safe operation.
Complying with the instructions is
essential for your safety.
Before starting to work, the operator
has to check that the Hakomatic B 910
and its working implements are in
proper and safe operating condition.
Do not operate the Hakomatic B 910
without protective devices being
installed.
Detergents
Important note:
Use only detergents suitable for auto-
matic machines (low foaming). We
recommend using our agents for
cleaning and care, which are adapted
to the Hakomatic B 910. Those pro-
ducts comply with the provisions of
the Detergents Act (WRMG applicable
in Germany).
Comply with the instructions for cor-
rect dosage of detergent.
If there is much foam, this will affect
the performance of the machine.
Actually it indicates that there is ex-
cessive dosage or improper suitability
of detergent for the existing kind of
dirt. Detergent particles contained in
the soiled water and not being used
will cause formation of foam.
Please take the manufacturer’s
recommendations as a first basis.
Tests made by yourself in practice
then soon will make you find the ideal
detergent and the perfect dosage
applicable to it.
Correct dosage will help you to save
money and to take care of the en-
vironment.
Refilling the
fresh water tank
Open tank cover (III/1) and protect
with the supporting bar (III/2)
Refill fresh water according to the
requirements into the tank (III/3)
with a max. temperature of 50°C.
Add detergent according to the
manufacturer’s instruction.
Note: in the soiled water tank the
filling level must not get beyond the
maximum mark.
50
Scrubmaster B140 R
When using the Scrubmaster B140 R, the
Scrub-
master B140 R is strictly prohibited.
Scrubmaster give im-
Scrubmaster B140 R
Scrubmaster B140 R
Scrubmaster B140 R.Those pro-
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hako Scrubmaster B140R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hako Scrubmaster B140R in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info