564793
6
Zoom out
Zoom in
Previous page
1/19
Next page
6
5.2. Combustion air supply
It must be ensured that there is sufficient fresh air at the place of installation.
5.3. Outside air connection
We recommend using the outside air connection for the supply of combustion air in order not to use up the
valuable indoor air when heating.
To do this, connect the air intake elbow located on the back to a hose or a similar, suitable air duct or to a
chimney system designed for this purpose. The diameter of the air duct must be at least the diameter of
the outdoor air connection on the stove.
The end of the air duct must be located outside or in a well ventilated area (basement).
It is not recommended to feed the cold air into the room from outside via a direct duct, as this can lead to the
build-up of condensation.
In order to guarantee a sufficient supply of air, the duct should not be longer than approx. 3 m and not
have too many bends.
If the duct leads outside, it must end with a 90° bend facing down or a wind protection device (see Figure
4).
Figure 4: Wind protection of air supply duct
For operation independent of indoor air with RLU certified appliances, the outside air connection must be
connected.
For the dimensions of the air supply duct:
Air supply duct diameter
Max. number of 90°
bends
50mm
1
100mm
3
If the dimensions are lower than specified, then it is not possible to operate the fireplace properly and it will lead
to increased contamination of the burner and inspection window.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn PELLETTO-RLU 418.08 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn PELLETTO-RLU 418.08 in the language / languages: English as an attachment in your email.

The manual is 0.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn PELLETTO-RLU 418.08

Haas-Sohn PELLETTO-RLU 418.08 Usermanual and installation guide - German - 34 pages

Haas-Sohn PELLETTO-RLU 418.08 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info