812035
28
Zoom out
Zoom in
Previous page
1/40
Next page
28
¾ Check if there is a vapour extraction
hood in operation
¾ Ensure the supply of necessary
combustion air e.g. slightly open the
window
¾ Contact service technician
7. Disconnection exhaust temperature in heating
mode insufficient (21)
Cause:
The operating temperature in heating mode
was below minimum temperature
This can be caused by the following:
No pellets available
The screw fails to turn, is jammed, the screw
motor is defective or the down pipe is
obstructed
The required combustion air cannot be
supplied to the oven, e.g. through a vapour
extraction hood that is switched on in the
vicinity of the place of installation.
Room too tight - required combustion air is
unable to flow into the room
Airflow sensor dirty or defective
Intake filter dirty
Burner dirty
Leaks on pellet oven (door, seals)
Flame temperature sensor defective
Exhaust temperature sensor defective
Remedy:
:
¾ Check pellet supply
¾ Check if the down pipe between pellet
tank and burner is unobstructed.
¾ Clean burner, intake filter and airflow
sensor
¾ Check if there is a vapour extraction
hood in operation
¾ Ensure the supply of necessary
combustion air e.g. slightly open the
window
¾ Contact service technician
8. Disconnection exhaust temperature in heating
mode too high (22)
Cause:
The maximum permissible exhaust
temperature was exceeded
This can be caused by the following:
Too much fuel is fed into the burner
Exhaust temperature sensor defective
Remedy:
¾ Contact service technician
9. Disconnection, combustion chamber door open
(6) or (9)
Cause:
Door is opened for longer than 1
minute during the operation
The adjusting plate at the bottom of
the door is not in the correct position
Electric cable to door contact switch
broken
The connector on the door contact
switch or on the central unit has
become loose
Remedy:
¾ Close door
¾ Put the adjusting plate at the bottom of the
door in the correct position so that the switch is
actuated with the door closed
¾ Check door contact switch, cable and
connector
10. Exhaust sensor interruption (7)
Cause:
Exhaust temperature sensor defective or not
connected
Remedy:
Contact service technician
11. Exhaust sensor short circuit (8)
Cause: Exhaust temperature sensor defective
Remedy:
Contact service technician
12. Room temperature sensor interruption (11)
Cause: Room temperature sensor defective or not
connected
Remedy:
Contact service technician
13. Room temperature sensor short circuit (12)
Cause: Room temperature sensor defective
Remedy:
Contact service technician
14. Airflow sensor interruption (14)
Cause: Airflow sensor defective or not connected
Remedy:
Contact service technician
15. Airflow sensor short circuit (13)
Cause: Airflow sensor defective
Remedy:
Contact service technician
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haas-Sohn COMPACT-PELLET 309 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haas-Sohn COMPACT-PELLET 309 in the language / languages: English as an attachment in your email.

The manual is 3.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Haas-Sohn COMPACT-PELLET 309

Haas-Sohn COMPACT-PELLET 309 User Manual - German - 43 pages

Haas-Sohn COMPACT-PELLET 309 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info