Manual Gys MULTIPEARL 200-2 (page 14 of 71) (English, German, Dutch, French, Italian, Spanish)

665744

Zoom out

Zoom in

1/71

MULTIPEARL 200.2 / 200.4 XL / 201.4

• Selecting MIG Synergic mode Keep button 2 pressed and at the same

time turn the upper knob until "MIG

Synergic" is displayed.

• Selecting the type of wire Keep button 2 pushed and at the same

time press the lower knob to go to the

wire type selection menu. Select the wire

type with the upper knob.

• Selecting the wire diameter Keep the button 2 pushed and at the

same time press the lower knob to go to

the wire diameter selection menu.

Select the diameter with the upper knob.

Then release the button 2 to validate.

Selecting the metal thickness to weld Turn the upper knob to select the metal

thickness to weld.

• Selecting the arc length Turn the lower knob to select the arc

length.

It gets longer (0 -> +9) or shorter (0 ->

-9) enabling to more or less penetrate

the metal. If you weld for the rst time

we recommend to set the arc length to 0.

• Selecting the welding position Keep button 1 pushed and turn both

knobs to select the welding position.

• Setting the management torch SPOT

and DELAY mode

• Press button 3 repeatedly to select

Normal mode.

• Still pressing the button 3, turn the

upper knob to get to the SPOT mode.

Adjsutable between 0.5 to 5 sec.

In the same way turn the lower knob to

congure the DELAY mode. Adjustable

between 0 to 5 sec.

SEMI-AUTOMATIC STEEL / STAINLESS STEEL WELDING (MAG)

The device is suitable for welding 0.6/0.8/1.0 steel wire and 0.8/1.0 stainless steel wire.

The device is delivered with contact tip, roller groove, liner and a torch set up for 0.8 steel or stainless steel wire. For welding 0.6 wire

use a torch no longer than 3m. To change the contact tip (see g II A). The roller is reversible 0.6/0.8. The indication on the visible

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gys MULTIPEARL 200-2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gys MULTIPEARL 200-2 Manual

Product: