Manual Gutmann Luminante (page 23 of 40) (English, German, Dutch, French, Italian, Spanish)

668868

Zoom out

Zoom in

1/40

until the indicator lamp goes out. The

grease filter indicator is activated after max.

15 operating hours or every two weeks(even

if no cooking operations take place).

Room ventilation

Pressing the Automatic Cool Down Period

button and the Clean Grease Filter Alert

symbol button at the same time activates/

deactivates the room ventilation function.

Cleaning and care

Cleaning of the surface

Risk of electric shock! Please separate the

extractor hood from the power supply

network by pulling the plug or the

disconnection of the fuse. Please pay

attention to the fact that no water seeps into

the appliance during the cleaning process.

Untimely cleaning of the surface saves later

a troublesome removing of stubborn

soiling. For the cleaning use only

commercial detergent or all-purpose

cleaners which are suitable for stainless

steel / aluminium.

Please do not use

scouring agents or steel wool! After the

cleaning of the extractor hood please tend

the stainless steel surfaces with a high-

grade steel-care product.

Only with a light soapy water and a very soft

cloth varnished surfaces have to be

cleaned. Please clean the switch panel only

with a soft and damp-dry cloth.

By extractor hoods with a pane beneath the

metal grease filter (“Perimeter Extraction”)

fatty deposits can occur on the edge of the

pane. These deposits are founded

physically and represent no dysfunction of

the extractor hood. Please clean the pane

beneath the filter regularly to prevent

stubborn soiling.

Cleaning and care instructions

When cleaning the grease filters, also

remove any grease deposits from the

accessible housing components. This will

prevent a fire hazard and maintain an

optimum range of functions. Use hot soapy

water or a mild window cleaning agent to

clean the hood. Do not scratch off baked-

on deposits. Soften them using a damp

cloth. Do not use abrasive agents or

scouring pads.

Note: Do not use alcohol (spirits) on plastic

surfaces, as dull spots may result.

Caution: Ventilate the kitchen sufficiently, no

open flame.

Only clean the operating panel with a soft

damp cloth (mild detergent solution). Do

not use stainless steel cleaners for the

sliding switch/pressure switch.

Stainless steel surfaces:

Use a mild and non-abrasive stainless

steel cleaning agent. Do not clean stainless

steel surfaces with abrasive scouring pads

or with cleaning agents containing sand,

soda, acid or chloride! Clean in direction of

polish only.

We recommend our stainless steel clea-

ner no. 461731. See the enclosed service

booklet for the order address.

Aluminium, varnished and plastic

surfaces:

Use a soft microfibre cloth. Do not use dry

cloths. Use a mild window-cleaning agent.

Do not use aggressive cleaning agents or

agents containing acid or lye! Do not use

scouring agents.

Exchange and cleaning of the filter

Fire risk! The performance of the extractor

hood is affected by containing fat remains

and therefore the fire risk increases. To

prevent a fire risk please clean the metal

filter regularly. The metal grease filter must

be cleaned every 2 weeks at last.

By models with a pane beneath the filter

(“Perimeter Extraction”) the pane has to be

removed at first. For this swing at first the

small front glass pane with one hand

upwards and then take the filter out at its

grip. The metal grease filter is fixed by a

magnet. The installation is made in reverse

order.

The metal grease filter is to be cleaned at

best in a dishwasher or in hot soapy water.

Aggressive cleaners should not be used.

The guarantee can´t be applied if a

discolouring on the filter is a result of using

an aggressive dishwashing liquid. Please

avoid temperatures over 55 degrees.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gutmann Luminante in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gutmann Luminante Manual

Product: