668868
22
Zoom out
Zoom in
Previous page
1/40
Next page
Product description
Switch Panel
The switch panel consists according to the
model type of five or seven key buttons.
right button (3) for at least 5 seconds. The
alert light will turn off. The clean grease filter
alert will be activated after a maximum of
15 operating hours or 14 days (even if not-
hing has been cooked
Room ventilation
Pressing the Int button and the clock
symbol button at the same time activates/
deactivates the room ventilation function.
Slider panel control element
The slider panel control element consists
of 4 control panels.
Fan power
Power of the supercharger
The first four buttons control the power of
the supercharger.
Button „1“ = low performance of the
supercharger
Button „2“ = middle performance of the
supercharger
Button „3“ = high performance of the
supercharger
Button „Int“ = intensive level
Press any button to switch on the extractor
hood. The hood is switched off by pressing
the back-lighted keys once more. The
extractor hood automatically switches back
after 3 min. from the intensive level to level
3 (high performance of the supercharger).
Automatic Cool Down Period
The automatic cool down period is activated
by pressing the button with the clock symbol.
The exhaust hood will progressively switch
from level 3 down to level 1 and run at that
level for approximately 15 minutes before
turning off.
Lighting
Press the button with the light symbol to
turn on the illumination. The illumination is
turned off by pressing the button again. The
illumination is dimmed by pressing and
holding the button for a longer period.
Brightness is raised again by another long
press of the button.
Clean Grease Filter Alert
When the clean grease filter alert lights up
(right button), the filter must be cleaned. Af-
ter cleaning the filter, press and hold the
en
STOP fan
motor off
Automatic
follow-up time
grease filter
cleaning
Fan power
intensive level
Touch any field to switch on. The lit field is
touched again to switch off. The fan power is
shown in the left control symbol. Press your finger
onto the symbol area and slowly push to the
right = fan power is increased. All LED bars are
lit = intensive level (switches back by one level
after approx. 5 minute). The more LED bars are
lit, the higher the fan power. Press the LED bar
to the left by touch = the fan power is reduced.
Push the LED bar completely to the left = fan
motor off (LED bar no longer lit).
Automatic follow-up time
By touching the field with the follow-up time
symbol (2nd symbol form the left), the automatic
follow-up time is activated and the follow-up time
symbol lights up. The extractor hood switches
back from level 3 to level 1and runs for approx.
~15 min. there before switching off.
Lighting
Touch the field with the lighting symbol to
switch on the lighting. The lighting is
switched off by touching again. Touch the
lighting symbol for a longer time = lighting
is dimmed
Display grease filter cleaning
The filter needs cleaning when the filter
cleaning symbol is flashing. Touch the filter
cleaning symbol field for at least 5 seconds
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gutmann Luminante at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gutmann Luminante in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info