668868
21
Zoom out
Zoom in
Previous page
1/40
Next page
Subject to technical modifications!
en
Transport, unpacking, installation
Condensation may occur if the appliance
is brought into the installation site from a
cold environment. Please wait until the
appliance has adjusted to the temperature
and is completely dry before operating it.
The acclimatization period depends on the
temperature difference and the type and
design of the appliance. However, it should
be at least 12 hours.
Connecting the power supply
Check that the rated voltage indicated on
the appliance matches the mains voltage
in your area. Connection to the incorrect
voltage will damage or destroy the
appliance.
Before switching on the appliance, check
that all cables and lines are properly fitted
and undamaged. Make sure in particular
that there are no kinks in the cables, that
they are not pulled too tightly around corners
and that no objects are resting on them.
Also make sure that all plug connections
are securely inserted. Faulty shielding or
wiring poses a health hazard (electric
shock) and can destroy other appliances.
Appliances with mains plugs are fitted with
a safety-tested mains cable for the
respective country of use and may only be
connected to a correctly earthed safety so-
cket. Otherwise, there is a risk of electric
shock. Make sure that the socket on the
appliance or the domestic safety socket is
easily accessible so that the mains cable
can be unplugged from the socket in an
emergency or during servicing and
maintenance work.
Danger of electric shock!
Do not clean the hood with a steam clea-
ner or water pressure cleaner. The hood
must be disconnected from the power
supply prior to cleaning.
General functionality
The extractor hood has been developed
especially for the extraction of cooking
vapours for use in the private home.The
arised cooking vapours are catched by the
extractor hood and absorbed by the metal
grease filter (version D is add. equipped
with an active carbon filter).
The filters are held in the hood body by
magnets. By some models the filter is
covered by a pane. The accruing extraction
at the edge of the pane (“Perimeter
Extraction”) allows a very effective fume
absorption.The access to the filters is
guaranteed by models using the “Perime-
ter Extraction” method through the swinging
of the pane. The exhaust power is controlled
over the switch panel. Among the lighting
additional options are also controlled over
the switch panel by some extractor
hoods.The illumination of the cooking zone
is taken over by several halogen spotlights.
The extractor hood is produced of stainless
steel or aluminium.
1 Upper chimney
2 Lower chimney
3 Switch panel
4 Metal grease filter
5 Lighting
6 Hood body
1
2
3
4
5
6
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gutmann Luminante at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gutmann Luminante in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info