624539
50
Zoom out
Zoom in
Previous page
1/68
Next page
GB
Cleaving Knife Sharpening
Sharp the cleaving knife using a file on a regular basis. Remove any sharp edges and depressions
Tip:
Grease the cleaving knife with multipurpose grease on a regular basis . It will decrease the stress
and sometime, even the difficult to work stock may be cleaved.
Inspections and Maintenance Safety Instructions
The machine will serve as a sufficient aid only if maintained and care for appropriately. Insufficient
maintenance and care may result in accidents and injuries.
Inspections and Maintenance Schedule
Time Interval Description Other details if any
400 operating hours
Hydraulic oil change
HLP 46, 2,4 l
Before every use
Oil level check
Before every use
Check of the blade for sharpness and sharpening if necessary
Troubles and Troubleshooting
Jammed Stock Release
- Have the sliding bench going back to the stop and while doing so, start the steering device.
- Put a pre-cut wooden wedge across the jammed stock.
- Now, move the sliding bench to push the wooden wedge under the jammed stock completely.
- If it is impossible to release the jammed stock in this way, use the wooden wedge a tad bigger. Then
move the bench until the stock is released.
NOTICE:
- Do not have a third person assisting in releasing the jammed stock.
- Never attempt crushing the jammed stock by means of a tool. The motor block could crack in that
way.
- All the safety regulations included in Chapter “ General Safety Regulations”, p.4 shall apply to any
action described above. The manufacturer shall not be held liable for any personal and material
damage caused by unauthorised use of machine or a failure to observe safety regulations.
Spare Parts
Claims and orders of spar parts shall be executed/satisfied in a fast manner free of any
administrative hinders if a respective servicing form is used. Download the form at
http://www.guede.com/support
The form may also be requested from
Tel.: +49 (0) 79 04 / 700-0
Fax: +49 (0) 79 04 / 700-250
E-Mail: info@guede.com
50
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude W 520-5 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude W 520-5 T in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info