Manual Gude GBS 315 UG 55064 (page 22 of 136) (English, German, Dutch, French, Italian)

624766

Zoom out

Zoom in

1/136

D E F

Fig. 11

D Loosen butterfly nut (Fig. 2/ Pos. 19) under the

table and tilt the table - see F.

E The tilting angle may be read on the scale (Fig.

2/ Pos. 18). Retighten the butterfly nut (Fig.

2/Pos. 19).

Saw Band Line Setting

Fig. 12

• Switch the machine off and unplug. .

• The saw band line should be always set

prior to setting the saw band guide.

Check the saw band running by turning

the upper runner with hand. Adjust by

turning the line setting knob. (Fig. 2/Pos.

16). The band should run through the

runner centre as show in opposite figure.

Lock the set-up with butterfly nut (Fig.

2/Pos. 24) on the line setting knob.

Blade Door Locking

Fig. 13

• Switch off the machine and unplug.

• Having opened the door, loosen the lock

(Fig. 2/Pos. 2/5/10). Use a screwdriver to

do that. Remember to lock again when

closing the door.

Cutting Height Set-Up

Fig. 14

• Switch off the machine and unplug.

• Loosen butterfly nut (Fig. 2/Pos. 4) and

locate the blade upper guide with

adjusting wheel (Fig. 2/Pos. 3) so that a

distance of ca 2-3 mm from the cut

material is retained. Retighten butterfly

nut (Fig. 2/Pos. 3).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude GBS 315 UG 55064 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude GBS 315 UG 55064 Manual

Product: