624766
24
Zoom out
Zoom in
Previous page
1/136
Next page
GB
Lower Support Bearing Set-Up
Fig. 17
Loosen the screw on the guide rear side
and set the top roll so that it is just able to
move freely.
Band Speed Setting
Fig. 17
CAUTION
Unplug the machine before setting the saw
band speed. !
The band saw has 2 speeds (360 m/min and
780 m/min.)
Driving belt is (26) taken over 2 pulleys
(27+28). Driving sheave (27) has 2 pulleys of
different diameters. The other sheave is used
to tension the driving belt. The driving belt may
be released by turning the crank (11).
Put the high speed driving belt (780 m/ min)
on the reared sheave (large diameter) and on
the rear part of the pulley as shown in the
figure.
For low speed (360 m/min), put the driving
belt on front sheaves (small diameter)
Stretch the driving belt again so that it cannot
be compressed by more than 5 mm.
On/Off Switching
Fig. 18
The saw is switched on by pressing green
button „1“To switch it off, press button „0“.
The band saw has undervoltage
protection. Upon outage, the saw has to
be switched on again.
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GBS 315 UG 55064 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GBS 315 UG 55064 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info