626214

Gude GBM 900 95170 Manual

36
Zoom out
Zoom in
Previous page
1/50
Next page
• Switch the motor always off, before you perform any
setting or maintenance. This applies especially to the
replacement of the cutters. Always unplug the spark
plug connector for these activities.
• Use only approved parts. Use only identical spare
parts for maintenance and repair. For questions about
spare parts, contact an approved service center.
Behavior in case of emergency
Perform necessary first aid measures according to the injury
and call for medical attendance as soon as possible.
Prevent the injured against any further injuries and calm him
down.
Intended use
The product is designed only for the common use in the
agriculture and forestry, gardening and plant cultivation.
For non-observance of the requirements in generally
accepted standards as well as the requirements in this
manual, the manufacturer may not be held responsible for
damages.
•
Never work on excessively steep hillsides
(max. 30°)
• On slopes, always work in cross direction
and never in upward or downward direction. Be
very careful while changing direction.
• Pay attention to the ambient conditions, under
which you are working.
Disposal
The hints over disposal result from the pictograms which are
applied on the product and the packing. A description of each
pictogram can be found in the chapter “markings on the
product“.
Requirements for the operator
The operator should have read the operating manual carefully
before using the product.
Qualification
Besides a detailed training through a skilled staff, no special
qualification for the use of the product is necessary.
Minimum age
The product may not be operated by people, who are less
than 16 years old.
The use by young people forms an exception, if the operation
takes place during a vocational training to achieve the skill
and under supervision through a trainer.
Training
The use of the product requires only a corresponding training
through a skilled staff or on the basis of the operating manual.
A special training is not necessary.
Technical data
Motor 196 cm³ OHV 4-stroke
Motor power 3,8 kW/5,1 HP max. for 3600 min
-1
Idle-running speed 1600 min
-1
Cutting width 90 cm
Cutting height 30-80 mm
Tank capacity 3,6l
Noise value L
WA
108 dB
Consumption 1,5 l/h – gasoline lead-free
Dimensions 1500 x 900 x 920 mm (L x W x H)
Weight 85 kg
Part number 95170
Transport and storage
• The product may be only transported with the motor
switched off.
• Clean the product thoroughly before you store it.
• Store the product at a clean and dry place.
Fuel or oil may leak during the transport of the
product. Please protect the product accordingly and take
preventive measures against environmental pollution.
Installation (Fig. 2, 3)
1. Fasten the steering rod on the product with the provided
4 screws. During this, pay attention to the selection of the
correct working height.
2. Put the eccentric into the guidance of the sickle bar and
fasten the bar with the provided 4 screws.
Carry out the installation of the single parts in the demonstrated
order. During this, pay attention to the correct assembly of the
parts according to the figures.
The product will be delivered without fuel to facilitate
the transport. Please fill fuel up according to the technical
data.
Safety instructions for initial operation
Pay close attention to a tight fit of the screw joints and use
only the parts mentioned in the product description.
Risk of explosion!
• Fill the tank up only outdoors!
• Do not refuel, as long as the motor is still running or
is still hot!
• Do not smoke while refueling and do not refuel near
open fire.
Step for step instruction
The oil level must be checked before you put the
product into operation each time. Replenish oil if
necessary (Motor oil 500ml SAE30)
Step 1
Ruel the machine.
Step 2
Search the area for contaminants and remove them.
Step 3
Clean the product thoroughly after each use.
36
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GBM 900 95170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GBM 900 95170 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info