Manual Guardall WINDSOR SERIES 300i (page 9 of 48) (English)

629293

Zoom out

Zoom in

1/48

Installation & Programming Guide — 9

OP1/OP2 Operation

Outputs 1 and 2 when programmed can give one of the following

output types.

Detector Latch Output for latching detectors is normally open

circuit when unset and high when set.

Detector Reset Output for resetting devices that require the

removal of power to reset. The output is

normally high but pulses open circuit at the

start of the exit time and gives a 3 second

pulse at reset.

Entry Exit/Follow Output is normally open circuit but goes high

when the entry or exit timer is running.

Bell Follow Output is normally open circuit but goes high

while the bell timer is running.

Walk Test Output is normally open circuit but goes high

when the system is in walk test mode.

Auxiliary Signals a zone activation if the zone is

configured for Aux and the attribute is defined

for Output 1 or 2. (Normally open circuit, going

high on activation).

The above conditions are shown for normal polarity. For inverse

polarity, the conditions are reversed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Guardall WINDSOR SERIES 300i in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Guardall WINDSOR SERIES 300i Manual

Product: