633020
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
- Function No. 2: RAPID TEST.
With this function it is possible to check the correct installation carrying out a test of all the
alarm connections.
Additional modules entry test: triggering the sensor (ultrasonic microwaves, inclination
etc.) the system generates 1 beep and No.1 GREEN flash of the del LED on the receptacle.
DOORS pin switch test: opening one or more doors the system generates 4 beeps
and 4 GREEN flashes of the LED on the receptacle.
BOOT/BONNET switch test: opening the boot and bonnet the system generates 5 beeps
and 5 GREEN flashes of the LED on the receptacle.
Starting attempt test: switching the ignition key on the system generates 6 beeps and
6 GREEN flashes of the LED on the receptacle.
Wires cut test: taking out the power supply to the alarm the system generates 7 beeps
and 7 GREEN flashes of the LED on the receptacle.
There are two ways to come out from the RAPID TEST:
1 - Automatically waiting 2 minutes without triggering any alarm line.
2 - Place the electronic key incorporated in the handset to the RECEPTACLE/LED or press
the “ON/OFF” handset button.
- Function No. 3: COMFORT CLOSING.
If enbled it allows the windows to automaticaly close (only for the vehicles equipped with
this function) supplying a closing command with a duration of 40 seconds after 5 seconds
from the doors closing and the alarm is set.
1 - Select the function and ENABLE/DISABLE pressing the “ON/OFF” handset button.
- Function No. 4: ACOUSTIC SIGNAL WHEN ARMING/DISARMING.
It is possible to program the acoustic signal (beep) to indicate the alarm arming and
disarming on or off.
1 - Select the function and ENABLE/DISABLE pressing the “ON/OFF” handset button.
- Function No. 5: INDICATOR COMMAND.
If the function is ENABLED with the only ORANGE wire it is possible to command the
indicators by the emergency indicators original switch (only on the vehicles equipped with
this function).
1 - Select the function and ENABLE/DISABLE pressing the “ON/OFF” handset button.
- Function No. 6: DOOR SWITCH PULSING MANAGEMENT.
If this function is ENABLED it allows connection to vehicles with negative impulses (pulsing)
on the original doors contacts.
1 - Select the function and ENABLE/DISABLE pressing the “ON/OFF” handset button.
- Function No. 7: POSITIVE DOOR SWITCH MANAGEMENT.
If this function is ENABLED, it allows connection to the door contacts which supply a
stable positive when the door is opened.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GT 915 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GT 915 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info