633026
10
Zoom out
Zoom in
Previous page
1/16
Next page
10
8.0 - SELF-POWER SUPPLY
9.0 - FINAL OPERATIONS
The GT 800/2 alarm system siren is equipped with a rechargeable “backup” battery which
allows the alarm power supply in case of alarm wires cut.
The siren will recharge following a disarmed alarm and with the ignition key switched on for at
least 16 hours. The protection is operating only when the alarm system is armed.
Ensure that the alarm system loom is installed correctly. Reassemble all the parts and carry
out the final test. Check an alarm trigger with the siren at maximum power. Opening the
bonnet, the boot or one of the doors a signal is sent, which will trigger the alarm system.
The RAPID TEST procedure can be stopped in two ways:
A - After about 2 minutes from the test function activation, the alarm system emits a long
acoustic signal and it comes out automatically if any other sensor has not been activated.
B - Pressing the door locking button from the original vehicle handset the alarm system emits
a long acoustic signal and it comes out from the function. If the doors locke but the alarm
remains disarmed, you will need to disarm and rearm the alarm using the original remote
control handsets to restore correct sequence.
If the RAPID TEST procedure has been correctly performed (from the points 1 to 6), but
you wish to carry out it again, ensure that the alarm system is disarmed and repeat the
operation from the point A (Earth the GREEN/YELLOW wire).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GT 800-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GT 800-2 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info