570171
11
Zoom out
Zoom in
Previous page
1/21
Next page
Receiver Buttons and Functions
11
Audio
Press the AUDIO button to display the current audio mode;
for example:
By repeatingly pressing the AUDIO, selection can be made
between
sound 1 = mainsound, broad
sound 2 = subsound, mono narrow and
sound 3 = Pandaton*, Stereo.
*Panda/Wegener Communication for superior sound quality.
In case of stereo reception, an LED ßI on the receiver comes
on. Quick scrolling results from pressing one of the ɼɦ
button. For example:
The frequency can be changed between 5.00 MHz and
9.99 MHz in 10 kHz increments.
Constant pressure on one of the
ɼɦ buttons results in quick
scrolling.
Direct frequency input is possible using the remote control
numeric buttons. Tuning begins only after the third digit is
entered.
Selecting radio operation
You can switch from SAT/TV to radio operation using the
RADIO button and visa versa. The most previous selected
programme is automatically selected (Last Station Memory).
The screen is dark in radio operation and the following
appears:
Radio operation is also indicated by an LED
9.
In order to take advantage of optimum sound quality, connect
the receiver to your hifi system. As the picture , which has
nothing to do with the sound, can disturb the sound, you can
switch the TV off.
-
-
I
OO
H3
7.02
RADI= P1
Adjusting video range
Frequency modulated satellite signals are transmitted at
various shift values. The reciever must be appropriately
adjusted for correct picture quality.
Press the VIDEO button; video shift and polarity are shown in
display, for example:
Using buttons
ɼɦ you can select between video shift h1 =
25 MHz, h2 = 22,5 MHz and h3 = 16 MHz and h -1, h -2 and
h -3.
For reception of C and S band with 4 or 2.5 Ghz LNCs, video
signal inversion is required; therefore, select h-1...h-3
setting.
Setting buttons ɼɦ up and down
The programme postition number is selected in the program-
me mode with the ɼɦ buttons.
With SAT reception, the programme positions
P1 ... P199 or with radio P1 ... P99 are shown in the display.
The OSD (On Screen Display) – shows the programme position
number in the upper right hand corner of the screen for
approx. 3 seconds.
The input is changed in the other modi with the
ɼɦ buttons.
Constant pressure one of these buttons results in quick scrol-
ling.
Switch the receiver from stand by with the
ɼɦ buttons to the
last selected SAT programme position
(Last Station Memory).
Memory
All altered data is stored after pressing the MEMORY button.
PI99
H
3
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig STR 312 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig STR 312 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig STR 312

Grundig STR 312 User Manual - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info