30
Programming the video recorder
Do not forget to pre-programme your video recorder accordingly for the timer
recording.
Important!
The satellite receiver and the video recorder must be in standby and the
»
AV
« programme position must be selected on the video recorder.
About 30 seconds before the start time of a timer recording is reached, a
message reminding you of the timer recording appears on the picturte screen.
Please select.
When the start time of the timer is reached, all menus disappear from the pic-
ture screen and you will see the TV picture of the programme being recorded.
– »
rcd
« (= record) appears in the satellite receiver’s display signalling you
that a timer recording has been started.
– While a timer recording is running, all button functions of the satellite receiver,
except the standby button »
Ǽ
«, are locked.
Cancelling a running timer recording
1 Press the »
Ǽ
« (standby) button.
– A dialogue box appears on the picture screen.
2 If desired, select »Yes« using the »
P+, P-
« buttons then confirm with
»OK«.
– The current timer recording is cancelled and the satellite receiver is
switched in standby.
3 Switch the satellite receiver on using any button on the remote control.
– The last selected programme appears on the picture screen.
TIMER PROGRAMMING
___________________________________________________________
