769837

Grundig GWNE67E432 Manual

27
Zoom out
Zoom in
Previous page
1/68
Next page
27 / EN
Washing Machine / User’s Manual
CThe Remote Control application may ask you to enter the product number stated on the label
of the product. Product label is found on the inner side of the loading door. Product number is
written on this label.
4.3.15.2 Setting up a washing machine that is connected to someone else’s account
If the washing machine you want to use was registered in the system with someone else’s account before, please
firstly create a new account and log in to this account on the HomeWhiz application. After you have logged on in the
application, you can follow the steps described in the section 4.3.15.1 in order to setup and onboard your device.
CYour request to add the product will be sent to the product's owner via e-mail. You can start to use the product mutually
once the product's owner has approved your request. Plus, the product owner may accept or reject the request sent
through the application. For this, the person must select the Settings tab on the main page of the application. They must
proceed to the User Linking Settings page and accept the request, if they want to.
4.3.15.3 Deleting Remote Control Account Linking
To delete the linking of a washing machine that has been paired with someone else’s account, follow the steps
below.
• Press the On/Off key to turn on your washing machine.
• While your machine is on, press and hold the auxiliary function key 1 and Time Delay key for five seconds.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
• After countdown “5-4-3-2-1“ on the display, you will hear a beep for your request. Deleting the linking
will take a few seconds. Once it is complete, you will hear two beeps.
AWARNING: Once you have completed this procedure, you cannot use the Remote Control function of your machine until
you perform setup again.
WARNING: Your product does not have to be connected to the internet to delete the account linking. Your request will be
received. Linking will be automatically deleted as soon as your product connects to internet.
4.3.15.4 Remote Control Function and Its Use
After setting up the Remote Control function, wireless connection will be enabled automatically. To activate or
deactivate the wireless connection, please see “4.3.8.2 Wireless Connection’’.
If you turn off and on your machine while wireless connection is active, it will automatically reconnect. In cases
such as network password change or modem turn-off, the wireless connection will be disabled automatically. For
this reason, you will need to turn it on again if you want to use the Remote Control function.
You can check the wireless connection symbol on the display to track your connection status. If the symbol is
continuously on, you have internet connection. If the symbol is flashing, the product is trying to connect. If the
symbol is off, you have no connection.
AWARNING: If the wireless network connection is enabled on your product, you can select the Remote Control function.
If the Remote Control function cannot be selected, check the connection status. If the connection fails, repeat the initial set-
up settings on the appliance.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GWNE67E432 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GWNE67E432 in the language / languages: English as an attachment in your email.

The manual is 6.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig GWNE67E432

Grundig GWNE67E432 User Manual - Dutch, French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info