769837
26
Zoom out
Zoom in
Previous page
1/68
Next page
26 / EN Washing Machine / User’s Manual
Your washing machine will send you a notification through the HomeWhiz application in the
following cases:
When the
programme is over,
When the door of the washing machine is opened,
When No water warning is given,
When a safety warning is given,
CTo use the Remote Control function, the app must be installed on your smart device and your washing machine must be
connected to your home network. If your washing machine is not connected to the network, it works as an appliance which
does not have the Remote Control function.
You product will operate connected to the wireless network at your home network. The controls carried out by means of the application
will be enabled through this network; for this reason, the network coverage around where your appliance is placed must be adequate.
HomeWhiz supports 2.4 GHz frequency band.
AWARNING: All the safety measures described in "GENERAL SAFETY INSTRUCTIONS" section of the user
manual apply to the remote operation through the Remote Control function as well.
WARNING: You need internet connection to use the Remote Control function. Otherwise, the app will not run on your
smart device. Please contact your internet service provider if you are having problems with your internet connection.
4.3.15.1 Installing the Remote Control App
For the application to run, a connection must be established between your product and the application.
AWARNING: You need internet connection to use the Remote Control function. Otherwise, the app will not run on your
smart device. Please contact your internet service provider if you are having problems with your internet connection.
If you are adding a product for the first time, tap "Add/Remove Product" on the app and touch "Tap here
to connect the product to the network". Follow the steps in the app to install it.
To start the setup, make sure that your washing machine is switched off. Press and hold the On/Off key
and the auxiliary function 1 (remote control) key simultaneously for five seconds to set the washing machine to
Remote Control setup mode.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
In the Remote Control setup mode, you will see an animated image on the display and the Wireless icon
will flash until your machine connects to internet. In this mode, only the On/Off key will be enabled. Other keys
will have no function.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
Tap “Add/Remove Product” on the app, and then tap “Connect new product to the network”.
Follow the on-screen instructions on the Remote Control app.
When the setup is complete, give your washing machine a name. Now, you can see the product you have
just added on the “Products” page.
CIf you cannot successfully carry out the setup within 5 minutes, your washing machine will turn off automatically. In this
case, you will have to start over the setup procedure. If the problem persists, please contact the authorised service provider.
You can use your washing machine with more than one smart device. To do this, download the Remote Control app on the other
smart device as well. After launching the app, you will need to sign in to your account you have previously created and paired with
your washing machine. Otherwise, please read “Setting up a washing machine that is connected to someone else’s account”.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GWNE67E432 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GWNE67E432 in the language / languages: English as an attachment in your email.

The manual is 6.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig GWNE67E432

Grundig GWNE67E432 User Manual - Dutch, French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info