574851
12
Zoom out
Zoom in
Previous page
1/20
Next page
12
OPERATION ________________________________
Air outlet – Recirculation
Version
7
Insert the Connector extensions 14.1 into the
side of the Connector 15.
7
Insert the Connector 15 into the Support
bracket 7.3 and fix it with the screws.
7
Fasten the Support bracket 7.3, fixing it to the
upper part with the Screws.
7
Make sure that the Connector extensions outlet
14.1 is in correspondence with the Chimney
openings both horizontally and vertically.
7
Join the Connector 15 to the Hood canopy
outlet using a rigid or flexible pipe ø¸150 mm,
selection of which is at the discretion of the in-
stallation technician.
7
Make sure that the Activated charcoal odour
filter has been fitted.
Flue assembly - Mounting
the hood body
7
Position the upper chimney section and fix the
upper part to the frame using the 2 screws 12c
(2,9 x 6,5) provided.
7
Similarly, position the lower chimney section
and fix the lower part to the frame using the 2
screws 12c (2,9 x 6,5) provided.
Before fixing the hood body to the frame:
7
Remove the grease filters from the hood body.
7
Remove any activated charcoal filters.
7
rom below, use the 4 screws 12f (M6 x 10)
provided to fix the hood body to the frame.
7
Make the electrical connections between the
Motor Unit and the Hood Canopy, connecting
the Controls connector and the Lighting con-
nector.
Warning: Make sure that the Connectors are
properly inserted into the housing.
Warning: There will be a specific Connector
according to the type of controls.
7
For the Recirculation Version, fit the Activated
Charcoal Odour Filter, if there is one.
7
Replace the metal grease filters.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GDI5792 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GDI5792 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info