574851
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
OPERATION ________________________________
Drilling the Ceiling/shelf
and fixing the frame
Drilling the Ceiling/shelf :
7
Use a plumb line to mark the centre of the hob
on the ceiling/support shelf.
Place the drilling template 21 provided on the
ceiling/support shelf, making sure that the tem-
plate is in the correct position by lining up the
e axes of the template with those of the hob.
7
Mark the centres of the holes in the template.
7
Drill the holes at the points marked:
- For concrete ceilings, drill for plugs appropri-
ate to the screw size.
- For hollow brick ceilings with wall thickness of
20 mm: drill ø 10 mm (immediately insert the
Dowels 11 supplied).
- For wooden beam ceilings, drill according to
the wood screws used.
- For wooden shelf, drill ø 7 mm.
- For the power supply cable feed, drill ø 10
mm.
- For the air outlet (Ducted Version), drill ac-
cording to the diameter of the external air ex-
haust duct connection.
7
Insert two screws of the following type, cro
ssing them and leaving 4-5 mm from the ceil-
ing:
- For concrete ceilings, use the appropriate
plugs for the screw size (not provided).
- For Cavity ceiling with inner space, with wall
thickness of approx. 20 mm, Screws 12h, sup-
plied.
- For wooden beam ceilings, use 4 wood
screws (not provided).
- For wooden shelf, use 4 screws 12g with
washers 22 and nuts 23, provided.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig GDI5792 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig GDI5792 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info