570230
12
Zoom out
Zoom in
Previous page
1/21
Next page
28
The device is suitable for CD-DAs and CD-Rs. Only use CD-DA bearing the
logo shown here. Always keep the CD compartment closed to prevent dust
from collecting on the laser optics. Do not attach adhesive labels to CDs.
Keep the surfaces of CDs clean.
When burning CD-R with audio data, various problems may arise which
could lead to interference in playback. This can be caused by faulty software
or hardware settings or by the CD being used. Should such problems arise,
contact the customer services of your CD burner or software manufacturer or
look for relevant information, for example on the Internet. When you make
audio CDs observe all legal guidelines and ensure that the copyrights of
third parties are not infringed.
Selecting the CD input source
1 Select CD as the input source with »CD•RADIO•TAPE«.
If there is no CD in the CD compartment, »00 00:00« flashes briefly
in the display and then disappears »
no d
ISC« then appears.
2 Open the CD compartment with »
OPEN/CLOSE
« on the device.
– Display: »
----
«.
3 Insert a CD in the compartment with its label facing upwards.
4 Close the lid of the CD compartment with »
OPEN/CLOSE
« on the de-
vice.
The device reads the content of the CD. The total number of tracks,
e.g. »14«, and the total playing time e.g. »51:12« appear in the dis-
play.
CD playback
1 Start playback with »PLAY/PAUSE
ı
II«.
– Playback begins with the first track.
– Display: the current track number and the elapsed playing time of the
track.
– Playback stops automatically at the end of the CD.
2 Pause playback by with »PLAY/PAUSE
ı
II«.
– Display: the elapsed playing time of the track flashes.
3 Continue playback with »PLAY/PAUSE
ı
II«.
4 End playback with »STOP
7
«.
Repeating the current track
1 Press »R-SKIP 8« briefly during playback.
– The track is repeated from the beginning.
Selecting a different track
1 Press »F-SKIP 9« or »R-SKIP 8« briefly during playback until the
number of the desired track appears in the display.
– Playback of the selected track starts automatically.
CD MODE
_________________________________________
CD
no d
ISC
CD
- - - -
CD
14 51
:
12
CD
01 0
:
03
CD
01 0
:
05
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig FREEZZ 20 RRCD 4301 PLL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig FREEZZ 20 RRCD 4301 PLL in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig FREEZZ 20 RRCD 4301 PLL

Grundig FREEZZ 20 RRCD 4301 PLL User Manual - German - 20 pages

Grundig FREEZZ 20 RRCD 4301 PLL User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info