ENGLISH
27
Manual station search
If the station search does not find a particular station, you can look
for it using the manual search. Make sure you enter all the parame-
ters of the station you are looking for correctly. You can find the
latest transponder information on the teletext pages of various
broadcasters, in a current satellite TV magazine or on the internet.
1 In the main menu, select »Installation« with »P-« or »P+« and
press »OK« to confirm.
2 Select »Station search« with »P-« or »P+« and press »OK« to
confirm.
3 Select »Manual search« with »P-« or »P+« and press »OK« to
confirm.
4 Press »P-« or »P+« to select the item and press »OK« to
confirm. Press »P-« or »P+« to make the setting and press
»OK« to confirm:
– »Satellite«: For selecting the satellite.
– »Encoded«: Select »Yes« (also search for encrypted
stations) or »No«.
– »Frequency«: Press »1 ... 0« to enter the five-digit
frequency of the channel.
– »Polarisation«: For setting the channel polarisation (»hori-
zontal« or »vertical«).
– »Symbol rate«: Use »1 ... 0« to enter the five-digit symbol
rate of the channel.
5 Press »
Ȅ« to start the search.
– At the end of the search, new TV or radio stations are
automatically added to the end of the station list.
Note:
If you do not find the station you are looking for, slightly change
the frequency (± 5 MHz) and start the search again.
A search will only be successful if the bit error rate (BER) is close
to 0 and the reception indicator is green.
6 Press »i« to finish the setting.
ADDITIONAL FUNCTIONS
_____________________________
Station search
Select Back Exit
and open
Automatic search
Manual search
Manuell search
Select Back Exit
and open Start
Level:70 Reception: ■
S/N:0.00 dB BER:>9000
Astra 19.2
No
12.480GHz
horizontal
27.500MS
Satellite
Ȅ
■■■■■■
■■■■
Encoded
Frequency
Polarisation
Symbol rate
