673694
32
Zoom out
Zoom in
Previous page
1/34
Next page
32
Displaying station reception properties
1 In the main menu, select »Installation« with »P-« or »P+« and
press »OK« to confirm.
2 Select »Info« with »P-« or »P+« and press »OK« to confirm.
3 Select »Reception parameters« with »P-« or »P+« and press
»OK« to confirm.
– The »Reception parameters« menu appears.
4 In the »Reception parameters« menu, press »P-« or »P+« to
change stations.
Notes:
The lower section of the menu shows the signal properties. The
lower the number of »Bit error« displayed (the optimum value is
»0«), and the further the »Signal level« bar extends to the right,
the better the reception signal.
The signal level not only depends on the settings of your
receiver unit, but also on the channel which is currently active.
Remember this when aligning your antenna using the signal
level display.
5 Press »i« to quit the menu.
Displaying device information
1 In the main menu, select »Installation« with »P-« or »P+« and
press »OK« to confirm.
2 Select »Info« with »P-« or »P+« and press »OK« to confirm.
3 Select »System information« with »P-« or »P+« and press
»OK« to confirm.
It contains information on the product designation, the hard-
ware version and the software version.
4 Press »i« to quit the menu.
Connecting the digital receiver to a PC
The »RS 232« serial interface allows you to connect to a PC.
To do this, you need a serial cable with a 1:1 assignment, i.e. all the
pins are directly connected. Depending on the PC, the cable needs
either a 9- or a 15-pin D-SUB socket, and a 9-pin D-SUB plug for
connection to the receiver.
You can use this connection for software updates and for uploading
and downloading other data.
You can find more information on the internet at www.grundig.com.
INFORMATION_____________________________________
System Info
Manufacturer: GRUNDIG
Hardware: V. 0100
Software: V. 0104
Remote control: TP 765S
Internet: http://www.grundig.com
Back Exit
DSR 2410
Reception parameters
Frequency: 12480 MHz
Symbol rate: 27500 kS
Polarisation: Vertikal
Bit error: 0
Reception: ok
S/N: 13 dB
Signal level: 254
Station Back Exit
select
7SAT.1
■■■■■■■■
■■■■■■■■■■■■■■■■■■■■■■■■
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig DSR 2410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig DSR 2410 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig DSR 2410

Grundig DSR 2410 User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info