Manual Grizzly EKS 1835 QT (page 150 of 200) (English, German, Dutch, French, Italian, Polish, Portuguese)

505393

150

Zoom out

Zoom in

1/200

150

Felling back cut (B):

Make the back cut from the other

side of the log, where you stand

to the left of the log and saw with

the chainsaw pulling. The back

cut must run horizontally not less

than 5 cm above the horizontal

notched cut.

The back cut should be so deep

that the separation distance

between the back cut and the

notch cutting line is at least 1/10

of the trunk diameter. The part

of the log not sawed through is

designated as a break dimen-

sion

Insert a felling wedge or a crow-

bar into the back cut, as soon

as the depth of cut permits this,

in order to prevent a jamming of

the chain bar.

If the trunk diameter is larger

than the length of the chain bar,

make two cuts.

For safety reasons, we advise inex-

perienced users not to fell any logs

with a rail length which is smaller

than the trunk diameter.

After carrying out of the back cut, the

tree falls by itself or with the aid of the

felling wedge or crowbar.

As soon as the tree begins to



section, stop the motor, place







 

-

ing, if the danger of property dam-

age exists or if the tree could fall



Immediately after termination of

the sawing procedure, remove the

ear protection so that you can hear

hooter and alarm signals.

1. :

Remove hanging branches by

positioning the cut from above the

branch. With removal of branches,

never work higher than shoulder

level.

2. Escape area:

Remove the undergrowth around

the tree to ensure an easy

escape. The escape area (1)

should be around 45° either side

behind the planned felling direc-

tion (2).

3. Cutting notch (A):

Make a felling notch in the direc-

tion in which you wish the tree to

fall. Start with an upper sawing

cut.

Now make a sawcut below,

which runs horizontally and en-

counters the upper sawcut

exactly.

The depth of cut of the notch

should be approx. 1/3 of the

trunk diameter and the cutting

angle at least 45°.

 

is notched.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly EKS 1835 QT in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese as an attachment in your email.

The manual is 6,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grizzly EKS 1835 QT Manual

Product: