Manual Grizzly EKS 1835 QT (page 148 of 200) (English, German, Dutch, French, Italian, Polish, Portuguese)

505393

148

Zoom out

Zoom in

1/200

148

• The saw chain must not contact either

the ground or another object during

sawing through or after sawing com-

pletion.

• Make sure that the saw chain does not

become jammed in the wood. Do not

let the tree trunk break or split off.

• Consider also the precautions against

spring-back (see notes on safety).

 

do not attempt to pull out the







-



Bucking

This refers to sawing up a felled tree trunk

into smaller sections.

• Ensure that the saw chain does not

come in contact with the ground during

sawing.

• Make sure you have a secure stance

and, in the case of sloping ground,

stand above the log.

1. Log is lying on the ground:

Saw through the log completely

from above and ensure at the

end of the cut not to contact the

ground.

If you can turn the tree trunk, saw

two-thirds of the way through it.

Then turn the trunk around and

saw the rest of the way through

from above.

2. Log is supported at one end:

Start sawing from the bottom and

work your way up (with the upper

edge of the bar) a third of the way

If no trace of oil appears, it may

be necessary to clean the oil out-

let channel or to have the electric

chainsaw repaired by our customer

service.

Sawing techniques

General

Observe the noise protection and lo-

cal regulations when cutting wood.

Local requirements may require a

suitability test. Ask the forestry com-

mission.

• Dirt, stones, loose bark, nails, staples

and wire must be removed from the tree.

• For sawing work on a slope, always

stand above the tree trunk.

• To keep control at the moment of

“sawing through”, reduce the contact

pressure at the end of the cut without

loosening the rm grip on the chain-

saw handles. Ensure that the saw

chain does not come into contact with

the ground.

• After completing the cut, wait for the

chainsaw to come to a standstill be-

fore removing the chainsaw.

• Always switch off the chainsaw motor

before moving from one tree to an-

other.

• Lay the connecting lead such that

it will not be caught on branches or

similar during sawing.

• For each cut, apply the claw stop se-

curely and only then start sawing.

• You have better control when you saw

with the bottom side of the chain bar

(with pulling saw chain) and not to

with the top side of the chain bar (with

pushing saw chain).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly EKS 1835 QT in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese as an attachment in your email.

The manual is 6,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grizzly EKS 1835 QT Manual

Product: