628192

Grizzly BRM 51-190 BSA Manual

88
Zoom out
Zoom in
Previous page
1/152
Next page
88
UK
4. To install, place new air lter (13)
into the air lter cover (14) (see
arrow on air lter).
5. Close the air lter cover and fas-
ten screw again.
Change / adjust spark plug
A worn spark plug or a spark gap
that is too large will result in a re-
duction of engine performance.
1.
Disconnect the spark plug con-
nector (11) from the spark plug by
simultaneously pulling and turn-
ing.
2. Unscrew spark plug counter
clockwise with spark plug socket.
3. Check the spark gap using a
feeler gauge (available from
specialist shops). The spark gap
must be at least 0.76 mm.
4. If necessary, adjust the gap by
carefully bending the ground
electrode on the spark plug.
5. Clean the spark plug with a wire
brush.
6. Insert the cleaned and adjusted
spark plug or replace a damaged
spark plug with a new one (rec-
ommended torque 20 Nm, de-
termined with a torque wrench)
(see “replacement parts“).
Changing the Engine Oil
For oil change, tilt equipment back-
ward with handlebar. Do not place
equipment on side to prevent operat-
ing liquids from leaking.
• Change the engine oil for the
rst time after around 5 operat-
ing hours then every 50 operat-
ing hours or annually.
• Change the engine oil when the
engine is warm.
• Dispose of the used oil in an
ecofriendly manner (see “dispos-
al / environmental protection“).
1. Open oil drainage screw (internal square
socket) at the base of the equipment.
2. Drain the motor oil into a suitable con-
tainer.
3. Wipe up spilled motor oil and refasten oil
drainage screw.
4. Place equipment upright and rell motor
oil (see „Initial Operation“).
Adjusting the Bowden Cable
If the Bowden cable becomes misplaced
for the drive and has too much play, it can
be adjusted.
1. Loosen the small lock nut (32a).
2. - Turn the adjusting nut (32b)
anticlockwise:
The Bowden cable shortens.
- Turn the adjusting nut (32b)
clockwise:
The Bowden cable lengthens.
… 88 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grizzly BRM 51-190 BSA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly BRM 51-190 BSA in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info